easy to use air pressure pump bar from wholesale for pressurization

Air booster pump with max 40 bar pressure

Suncenter DGMA02 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar. This series pump's drive piston diameter of 100mm, as a single action pump, all single acting pump head with exhaust cooling.

Air booster pump with max 40 bar pressure

easy to use air pressure pump bar from wholesale for pressurization-1

◪ technical parameters
◪ Driven source: clean compressed air
◪ Air pressure control system
◪ Drive compressed air pressure: 1-8bar (recommended drive pressure<8bar)
◪ Boost Ratio:2:1
◪ Maximum flow rate : 580L/min
◪ Maximum air output pressure: 16bar.
◪ Applicable medium: clean air
◪ Air inlet minimum pressure: 1bar

Model	Pressure boost ratio	Max. air outlet pressure	Formula to calculate air outlet pressure PB	Connection: (NPT thread)	Max. flow rate (L/min)
DGMA02	2：1	16 bar	2XPL	3/8 / 3/8	580
DGVA02	2：1	16 bar	2XPL	3/8 / 3/8	1600
DGMA03	3：1	24 bar	3XPL	1/2 / 1/2	420
DGVA05	5：1	40 bar	5XPL	1/2 / 1/2	820

Suncenter DGVA02 Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar. This series pump's drive piston diameter of 160mm, as a single action pump, all single acting pump head with exhaust cooling.

easy to use air pressure pump bar from wholesale for pressurization-2

◪ Technical parameters
◪ Driven source: clean compressed air
◪ Drive compressed air pressure: 1-8bar (recommended drive pressure<8bar)
◪ Boost Ratio:2:1
◪ Maximum flow rate : 1600L/min
◪ Maximum air output pressure: 16bar.
◪ Applicable medium: clean air
◪ Air inlet minimum pressure: 1bar

Suncenter DGMA03 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar.

easy to use air pressure pump bar from wholesale for pressurization-3

◪ Technical parameters
◪ Driven source: clean compressed air
◪ Air pressure control system
◪ Drive compressed air pressure: 1-8bar (recommended drive pressure<8bar)
◪ Boost Ratio:3:1
◪ Maximum flow rate : 420L/min
◪ Maximum air output pressure: 24bar.
◪ Applicable medium: clean air
◪ Air inlet minimum pressure: 1bar

Suncenter DGVA05 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar. This series pump's drive piston diameter of 160mm, as a single action pump, all single acting pump head with exhaust cooling.

easy to use air pressure pump bar from wholesale for pressurization-4

◪ Technical parameters
◪ Driven source: clean compressed air
◪ Air pressure control system
◪ Drive compressed air pressure: 2-8bar (recommended drive pressure<8bar)
◪ Boost Ratio:5:1
◪ Maximum flow rate : 820L/min
◪ Maximum air output pressure: 40bar.
◪ Applicable medium: clean air
◪ Air inlet minimum pressure: 2bar

Characteristics :

It is using pure compressed air as the driving source, pneumatic booster pump for the pressure source, the use of pure air as the pressurized medium, the output air pressure and the pressure of the driving air source pressure. By adjusting the pressure of the driven air source, the corresponding pressure of the air pressure can be obtained. When the air pressure of the air pressure and the pressure of the booster is balanced, the pneumatic booster pump stops the pressurization, and the output air pressure is stable. Therefore it has the characteristics of explosion proof, energy saving, environmental protection, adjustable output pressure, small volume, light weight, simple operation, reliable performance and wide application range.

DGS-DGMA02 air pressure booster system

easy to use air pressure pump bar from wholesale for pressurization-5

◪ The system including: DGMA02 air booster pump,
◪ F.R.L combination (adjust driven air pressure+ filter+ lubricant)
◪ Air tank (20L/40L),Driven air switch, high pressure needle valve, high pressure gauge, reducing valve

DGS-DGVA02 air pressure booster system

easy to use air pressure pump bar from wholesale for pressurization-6

◪ The system including: DGVA02 air booster pump
◪ F.R.L combination (adjust driven air pressure+ filter+ lubricant)
◪ Air tank (20L/40L),Driven air switch, high pressure needle valve, high pressure gauge, reducing valve

Model	Pressure boost ratio	Max. air outlet pressure	Formula to calculate air outlet pressure PB	Connection: (NPT thread)	Max. flow rate (L/min)
DGS-DGMA02	2：1	16 bar	2XPL	3/8 / 3/8	580
DGS-DGVA02	2：1	16 bar	2XPL	3/8 / 3/8	1600
DGS-DGMA03	3：1	24 bar	3XPL	1/2 / 1/2	420
DGS-DGVA05	5：1	40 bar	5XPL	1/2 / 1/2	820

DGS-DGVA05 air pressure booster system

easy to use air pressure pump bar from wholesale for pressurization-7

◪ The system including: DGVA05 air booster pump
◪ F.R.L combination (adjust driven air pressure+ filter+ lubricant)
◪ Air tank (20L/40L),Driven air switch, high pressure needle valve, high pressure gauge, reducing valve

video

r******a

We have a professional, dedicated and dedicated management team and a group of experienced production personnel. The team members work hard, insist on adopting advanced design concepts and using unique production technology to manufacture air pressure booster, which makes air pressure booster not only reasonable in structure, but also And the quality is stable.

q******x

Dongguan Suncenter Fluid Control Equipment Co., Ltd Actively study and introduce world-class management theories, establish a comprehensive quality management system, and implement the concept of product quality control throughout the entire process of product design, production, inspection, and use, and carry out quality control with full participation, It is better to ensure that the air pressure booster produced is always of consistent quality and excellent quality.

u******q

The air pressure pump manufactured by us with advanced design concepts not only strives for excellence in workmanship, scientific and reasonable design, but also has stable performance and durability, which can meet customers' needs for high-quality products.

w******q

air pressure booster It is made of imported high-quality raw materials and processed by advanced technology. In addition, air pressure booster will be tested by relevant national departments after the production and processing is completed. It meets the national quality standards. It is a product with stable performance and high quality. Quality product.

v******u

air pressure pump From raw material selection, production to processing, there are professionals to conduct testing. Not only that, air pressure pump After the production is completed, it will be inspected by relevant national departments to ensure that it meets international standards and is of high quality. , high-quality products of excellent quality.

n******a

Dongguan Suncenter Fluid Control Equipment Co., Ltd Strictly control costs in product procurement, production, processing, and logistics, practice strict savings, eliminate waste, and strive to reduce production costs, so that the produced air pressure booster has a price advantage compared with similar products.

Product Message

*Name

Phone

*E-mail

*Content