environmental fire extinguisher refill station filling type for fire extinguisher

Application Scope

The hydro test pump developed by Suncenter Fluid Control Equipment is widely used in various fields.With a focus on customers' potential needs, Suncenter Fluid Control Equipment has the ability to provide one-stop solutions.

Product Comparison

Suncenter Fluid Control Equipment's booster pumps has been substantially improved in a scientific way, as shown in the following aspects.

Company Advantages
1. fire extinguisher refill station from Dongguan Suncenter Fluid Control Equipment Co., Ltd adopts a new type of fire extinguisher refilling machine material.
2. By adopting advanced technology, the quality of this product can be assured.
3. This product perfectly matches people's personality and their outfits, which is why so many people have tried their hand at it.

DGS-FM-5A model automatic FM200 filling machine

Solution A (DGS-FM-5A) added the sensors, electromagnetic valve, vacuum pump, and the electronic scale based on solution B (manual control),it is automatic control mode

environmental fire extinguisher refill station filling type for fire extinguisher-1

◪ Main parameters:
◪ The driving source: compressed air (by air compressor, need 3-8 bar air pressure)
◪ Medium: FM200/ NOVEC/Nitrogen
◪ Boost ratio: 5:1
◪ Output pressure: 4.2 Mpa/5.3Mpa
◪ Driven air inlet port: fast insert 12 per cent
◪ Nitrogen/FM200 inlet port: ZG3/8 internal thread
◪ High pressure gas outlet port: ZG3/8 internal thread
◪ Electric scale range:0-500kg（there is also max 1000kg for optional）

DGS-DGGD16 model liquid CO2 filling equipment

environmental fire extinguisher refill station filling type for fire extinguisher-2

◪ The CO2 Fire Extinguisher filling equipment including following parts:
◪ Air–driven liquid CO2 gas booster pump
◪ Stainless steel material cabinet
◪ F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)
◪ Driven air switch (Pump starting switch), driven air pressure gauge
◪ Gas inlet switch, Gas inlet pressure gauge
◪ Gas outlet switch, Gas outlet pressure gauge, unloading valve, interconnecting pipes etc.
◪ And we could also customize it according to clients’special requirement.

Model	Pressure Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Driven air inlet port	High pressure Outlet port	MAX Flow (L/min)**
DGS-DGG16	16:1	3-8 bar	16XPL	128	G 1/2	NPT/ZG	12.42
DGS-DGG28	28:1	3-8 bar	28XPL	224	G 1/2	NPT/ZG	7.11
DGS-DGGD166	16:1	3-8 bar	16XPL	128	G 1/2	NPT/ZG	19.73
DGS-DGGD28	28:1	3-8 bar	28XPL	224	G 1/2	NPT/ZG	11.30

DGS-CO2-B model liquid CO2（fire extinguisher） filling machine

environmental fire extinguisher refill station filling type for fire extinguisher-3

◪ Main parameters:
◪ The driving source: compressed air (by air compressor, need 3-8 bar air pressure)
◪ Medium: CO2
◪ Max output pressure: 12.8Mpa
◪ Driven air inlet port: fast insert 12 per cent
◪ Liquid CO2 inlet port: ZG3/8 internal thread
◪ High pressure gas outlet port: ZG3/8 internal thread

Fire Extinguisher filling

environmental fire extinguisher refill station filling type for fire extinguisher-4

environmental fire extinguisher refill station filling type for fire extinguisher-5

video

Company Features
1. Dongguan Suncenter Fluid Control Equipment Co., Ltd is dedicated to the manufacturing and R&D of fire extinguisher refill station .
2. The quality of fire extinguisher refill can be guaranteed by our experienced technicians.
3. We use automatic filling machine to connect the future. Please contact us! High quality customer service of Suncenter is highly commented by customers. Please contact us!

l******q

Suncenter fire extinguisher refill station goes through much apparel & garment testing. They are fabric weight test, breathability test, needle damage check, burn test, symmetry check, etc.

l******b

Suncenter fire extinguisher refill station is manufactured under a series of processes. They are foot type collection, CAD design, materials selection, material preparation, machining, and care & repair.

p******g

Some basic tests for Suncenter fire extinguisher refill station have been conducted. These tests include rubbing fastness testing, color bleeding testing, shrinkage testing, color matching testing, and pilling testing.

i******c

The packaging of Suncenter automatic filling machine will be inspected for potential quality issues. It will be checked in terms of the polybag sealing method, polybag size, appropriate labeling, barcodes, and price tags.

s******y

There are four sections of Suncenter automatic filling machine quality controlling process. The four sections are cutting, sewing, washing, and finishing, which must be checked based on some criteria.

o******r

The product has quality consistency and stable performance to meet the requirements of the customers.

Product Message

*Name

Phone

*E-mail

*Content