high-energy fire extinguisher refill station co2 bulk production for fire extinguisher

DGS-FM-5A model automatic FM200 filling machine

Solution A (DGS-FM-5A) added the sensors, electromagnetic valve, vacuum pump, and the electronic scale based on solution B (manual control),it is automatic control mode

high-energy fire extinguisher refill station co2 bulk production for fire extinguisher-1

◪ Main parameters:
◪ The driving source: compressed air (by air compressor, need 3-8 bar air pressure)
◪ Medium: FM200/ NOVEC/Nitrogen
◪ Boost ratio: 5:1
◪ Output pressure: 4.2 Mpa/5.3Mpa
◪ Driven air inlet port: fast insert 12 per cent
◪ Nitrogen/FM200 inlet port: ZG3/8 internal thread
◪ High pressure gas outlet port: ZG3/8 internal thread
◪ Electric scale range:0-500kg（there is also max 1000kg for optional）

DGS-DGGD16 model liquid CO2 filling equipment

high-energy fire extinguisher refill station co2 bulk production for fire extinguisher-2

◪ The CO2 Fire Extinguisher filling equipment including following parts:
◪ Air–driven liquid CO2 gas booster pump
◪ Stainless steel material cabinet
◪ F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)
◪ Driven air switch (Pump starting switch), driven air pressure gauge
◪ Gas inlet switch, Gas inlet pressure gauge
◪ Gas outlet switch, Gas outlet pressure gauge, unloading valve, interconnecting pipes etc.
◪ And we could also customize it according to clients’special requirement.

Model	Pressure Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Driven air inlet port	High pressure Outlet port	MAX Flow (L/min)**
DGS-DGG16	16:1	3-8 bar	16XPL	128	G 1/2	NPT/ZG	12.42
DGS-DGG28	28:1	3-8 bar	28XPL	224	G 1/2	NPT/ZG	7.11
DGS-DGGD166	16:1	3-8 bar	16XPL	128	G 1/2	NPT/ZG	19.73
DGS-DGGD28	28:1	3-8 bar	28XPL	224	G 1/2	NPT/ZG	11.30

DGS-CO2-B model liquid CO2（fire extinguisher） filling machine

high-energy fire extinguisher refill station co2 bulk production for fire extinguisher-3

◪ Main parameters:
◪ The driving source: compressed air (by air compressor, need 3-8 bar air pressure)
◪ Medium: CO2
◪ Max output pressure: 12.8Mpa
◪ Driven air inlet port: fast insert 12 per cent
◪ Liquid CO2 inlet port: ZG3/8 internal thread
◪ High pressure gas outlet port: ZG3/8 internal thread

Fire Extinguisher filling

high-energy fire extinguisher refill station co2 bulk production for fire extinguisher-4

high-energy fire extinguisher refill station co2 bulk production for fire extinguisher-5

video

r******x

Suncenter fire extinguisher filling equipment is designed based on various concepts and guidance. They are mechanics, the theory of machines and mechanisms, materials science, processing technology, and so on.

c******a

The quality of Suncenter fire extinguisher refill station is absolutely correct. Our quality control team spares no effort in every step of material production, assembly, quality inspection and packaging to achieve this result.

x******g

Suncenter fire extinguisher filling equipment has a high level of quality.The QC team will carefully check the defects in weaving, loose thread and dyeing to ensure the quality.

v******f

The design of Suncenter fire extinguisher filling equipment follow these basic steps: recognition of its need or purpose, selection of a possible mechanism, analysis of forces, material selection, design of elements (sizes and stresses), detailed drawing, etc.

n******i

The quality of Suncenter fire extinguisher refill station is tested. It has been tested for strength, ductility, impact resistance, hardness, and fracture toughness.

a******h

We have a complete cost control system and insist on strictly controlling the production cost of each link of fire extinguisher refill station, so that the final production fire extinguisher refill station has a higher cost performance.

Product Message

*Name

Phone

*E-mail

*Content