long life hydrostatic testing chart producer forshipbuilding

Latest products

Suncenter High Pressure Pneumatic Oil-free Oxygen Booster System with 20L Gas Storage Tank

PLC + Touch screen Controlled Hydro Test Bench ( for Hydrostatic test / Burst test / Leak test )

Suncenter Oxygen Gas Compressor

Ultra High Pressure Gas Booster System

Product Information
Feedback

Hydrostatic pressure test pump with round chart recorder

SUNCENTER- Hydrostatic pressure test pump are compact and delicacy solution tailored to customer specific requirements with air driven liquid pumps as well as all accessories to be fitted and installed on the frame or in closed cabinet.

To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator. The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure. SUNCENTER Hydraulic power packs are available with wide range of pressure ratios make these series of pumps ideal for powering a variety of oil/hydraulic operations. The maximum operating pressure up to 640 MPa.

As the pressure will be generated by means of a pneumatically operated pump，the electric connection will not be necessary. To operate this system, the air driven liquid pump have to be equipped with the air control unit combined filter and water separator, pressure-regulating valve, pressure control gauge as well as manual relieve valve. In this operation, the pump will be mounted to the stainless steel tank in the closed cabinet in a compact and space saving manner. Pressure gauges, valves and pressure regulators will be fitted on panel.

The desired operating pressure can be attained by adjusting the driving air pressure. When the driving air pressure and the output pressure reach the balance, the pump stops filling pressure and the output pressure stays at the preset value. This hydraulic unit can be used for all kinds of pressure testing and test tools for research and test institutes or for other functions requiring a determined pressure.

Suncenter chart hydrostatic testing producer forshipbuilding-1

Suncenter chart hydrostatic testing producer forshipbuilding-2

DLS Sereis Hydrostatic pressure test pump with round chart recorder including following parts:

Suncenter chart hydrostatic testing producer forshipbuilding-3

◪ Air –driven liquid booster pump，round chart recorder
◪ Stainless steel material cabinet
◪ F.R.L combination for driven air (adjusts air pressure, add lubricating oil and filter)
◪ Driven air switch (Pump starting switch), driven air pressure gauge, water tank
◪ Liquid inlet/outlet switch, high pressure liquid guage, unloading valve, interconnecting pipes etc.
◪ And we could also customize it according to clients’ special requirement.

Model	Pressure Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Driven air inlet port	High pressure Outlet port	MAX Flow (L/min)**
DLS-DGGD4	4:1	3-8 bar	4XPL	32	G 1/2	NPT/ZG	70.0
DLS-DGG6	6:1	3-8 bar	6XPL	48	G 1/2	NPT/ZG	29.91
DLS-DGG10	10:1	3-8 bar	10XPL	80	G 1/2	NPT/ZG	18.84
DLS-DGG16	16:1	3-8 bar	16XPL	128	G 1/2	NPT/ZG	12.42
DLS-DGG28	28:1	3-8 bar	28XPL	224	G 1/2	NPT/ZG	7.11
DLS-DGG40	40:1	3-8 bar	40XPL	320	G 1/2	NPT/ZG	4.89
DLS-DGG64	64:1	3-8 bar	64XPL	512	G 1/2	NPT/ZG	3.08
DLS-DGG80	80:1	3-8 bar	80XPL	640	G 1/2	NPT/ZG	2.44
DLS-DGG100	100:1	3-8 bar	100XPL	800	G 1/2	NPT/ZG	1.92
DLS-DGG130	130:1	3-8 bar	130XPL	1040	G 1/2	NPT/ZG	1.47
DLS-DGG175	175:1	3-8 bar	175XPL	1400	G 1/2	NPT/ZG	1.14
DLS-DGG255	255:1	3-8 bar	255XPL	2040	G 1/2	NPT/ZG	0.75
DLS-DGG400	400:1	3-8 bar	400XPL	3200	G 1/2	NPT/ZG	0.48
DLS-DGG510	510:1	3-8 bar	510XPL	4080	G 1/2	NPT/ZG	0.65
DLS-DGG800	800:1	3-8 bar	800XPL	6400	G 1/2	NPT/ZG	0.42

Suncenter chart hydrostatic testing producer forshipbuilding-4

◪ DLS series Hydrostatic pressure test pump with paper round chart recorder

video

y******f

The manufacture of Suncenter high pressure hydraulic pump requires the use of different facilities. It is processed under stamping, coating, painting, and drying equipment that features high performance and efficiency. Its material is antibacterial and inhibits the growth of pathogenic microorganisms

r******x

During the design stage of Suncenter hydrostatic testing, many factors have been taken into considerations such as flexibility, cycle times, tolerances, size precision, etc. It can be kept on a ramp near the terminal when not in use for quick accessibility

z******q

The development of Suncenter high pressure hydraulic pump considered several key mechanical properties. It is developed with the stiffness, strength, hardness, ductility, and toughness which are critical for its operation. Aluminum materials help it reduce maintenance costs

t******n

The design of Suncenter high pressure hydraulic pump focuses on the basic principles of the following three areas: mechanical behavior, machine elements, and manufacturing processes. It can be designed with the front bumper to minimize walkway damage

b******h

The materials used for Suncenter hydrostatic testing have been tested. The testing procedures include tensile testing, toughness or brittleness testing, hardness testing, infiltrate testing and testing through radiations. Its material is antibacterial and inhibits the growth of pathogenic microorganisms

f******k

The product can be easily adjustable. It is equipped with an adjustable strap such as laces or Velcro which allows for adjustment. It can be designed with the front bumper to minimize walkway damage

Product Message

*Name

Phone

*E-mail

*Content