specialsafety fire extinguisher refill filling free design for fire extinguisher

Latest products

Suncenter High Pressure Pneumatic Oil-free Oxygen Booster System with 20L Gas Storage Tank

PLC + Touch screen Controlled Hydro Test Bench ( for Hydrostatic test / Burst test / Leak test )

Suncenter Oxygen Gas Compressor

Ultra High Pressure Gas Booster System

Product Information
Feedback

DGS-FM-5A model automatic FM200 filling machine

Solution A (DGS-FM-5A) added the sensors, electromagnetic valve, vacuum pump, and the electronic scale based on solution B (manual control),it is automatic control mode

Suncenter filling fire extinguisher refill free design for fire extinguisher-1

◪ Main parameters:
◪ The driving source: compressed air (by air compressor, need 3-8 bar air pressure)
◪ Medium: FM200/ NOVEC/Nitrogen
◪ Boost ratio: 5:1
◪ Output pressure: 4.2 Mpa/5.3Mpa
◪ Driven air inlet port: fast insert 12 per cent
◪ Nitrogen/FM200 inlet port: ZG3/8 internal thread
◪ High pressure gas outlet port: ZG3/8 internal thread
◪ Electric scale range:0-500kg（there is also max 1000kg for optional）

DGS-DGGD16 model liquid CO2 filling equipment

Suncenter filling fire extinguisher refill free design for fire extinguisher-2

◪ The CO2 Fire Extinguisher filling equipment including following parts:
◪ Air–driven liquid CO2 gas booster pump
◪ Stainless steel material cabinet
◪ F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)
◪ Driven air switch (Pump starting switch), driven air pressure gauge
◪ Gas inlet switch, Gas inlet pressure gauge
◪ Gas outlet switch, Gas outlet pressure gauge, unloading valve, interconnecting pipes etc.
◪ And we could also customize it according to clients’special requirement.

Model	Pressure Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Driven air inlet port	High pressure Outlet port	MAX Flow (L/min)**
DGS-DGG16	16:1	3-8 bar	16XPL	128	G 1/2	NPT/ZG	12.42
DGS-DGG28	28:1	3-8 bar	28XPL	224	G 1/2	NPT/ZG	7.11
DGS-DGGD166	16:1	3-8 bar	16XPL	128	G 1/2	NPT/ZG	19.73
DGS-DGGD28	28:1	3-8 bar	28XPL	224	G 1/2	NPT/ZG	11.30

DGS-CO2-B model liquid CO2（fire extinguisher） filling machine

Suncenter filling fire extinguisher refill free design for fire extinguisher-3

◪ Main parameters:
◪ The driving source: compressed air (by air compressor, need 3-8 bar air pressure)
◪ Medium: CO2
◪ Max output pressure: 12.8Mpa
◪ Driven air inlet port: fast insert 12 per cent
◪ Liquid CO2 inlet port: ZG3/8 internal thread
◪ High pressure gas outlet port: ZG3/8 internal thread

Fire Extinguisher filling

Suncenter filling fire extinguisher refill free design for fire extinguisher-4

Suncenter filling fire extinguisher refill free design for fire extinguisher-5

video

l******z

The design of automatic liquid filling machine shows a strong sense of art. Dezheng owns a well-equipped factory of 1,500 square meters

k******y

Without cutting edge technology, automatic liquid filling machine can't be so warmly welcomed in market. Dezheng offers professional and cost-effective custom printing service

l******y

fire extinguisher refill outrival other similar products with its fire extinguisher refill design. Dezheng has been engaged in the printing industry since 1997

y******h

automatic liquid filling machine and automatic liquid filling machine are biggest strong points of our fire extinguisher refill. Dezheng offers embossing, debossing, hot stamping, matte/glossy lamination, and other surface finishes

b******n

The original design for fire extinguisher refill is its biggest advantage. Dezheng utilizes high-quality papers only

e******n

The QC team has been always focusing on providing the highest quality of this product for customers. Over 20+ years of development, Dezheng now has 10,000 customers worldwide

Product Message

*Name

Phone

*E-mail

*Content

Suncenter filling fire extinguisher refill free design for fire extinguisher