booster pump price pump owner for pressurization

Latest products

Ultra High Pressure Gas Booster System

Refrigerant Filling Pump

Portable Safety Valve Test Bench

Automatic CO2 Extinguisher Filling Machine

Product Information
Feedback

Enterprise Strength

Suncenter Fluid Control Equipment adheres to the service principle to be timely and efficient and sincerely provides quality services for customers.

Product Comparison

Compared with other products in the same category, hydro test pump has outstanding advantages which are mainly reflected in the following points.

Company Advantages
1. Suncenter co2 transfer pump has passed the flammability test. The testing principle is simple. The ignition source is applied to it in a standardized manner and any smoldering or combustion behavior is recorded.
2. The product features excellent color fastness. It is good at retaining color in the condition of washing, light, sublimation, and rubbing.
3. With no sharp edges, this product is safe to use and will not cause any scratch when people use this product.
4. This product is able to carry around people's stuff in an organized manner. It can easily store things which people wish to carry around while traveling.

Air Driven Liquid CO2 Booster Pump-DGG/DGGD Series.

SUNCENTER pumps are air driven at a drive air pressure of 2bar to 8bar by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve.

Suncenter pumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios.Suncenter model numbers reflect the pumps nominal pressure ratios， while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal outlet pressure can be calculated.

Suncenter pump booster pump price owner for pressurization-1

DGG Series Liquid CO2 Booster Pumps(Single acting)

Suncenter pump booster pump price owner for pressurization-2

◪ DGG Series Liquid CO2 Booster Pumps(Single acting)  

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)
DGG6	6:1	2-8 bar	6XPL	48	NPT1/2	NPT1/2	29.91
DGG10	10:1	2-8 bar	10XPL	80	NPT1/2	NPT1/2	18.84
DGG16	16:1	2-8 bar	16XPL	128	NPT1/2	NPT1/2	12.42
DGG28	28:1	2-8 bar	28XPL	224	NPT1/2	NPT1/2	7.11
DGG40	40:1	2-8 bar	40XPL	320	NPT1/2	NPT1/2	4.89
DGG64	64:1	2-8 bar	64XPL	512	NPT1/2	NPT3/8	3.08
DGG80	80:1	2-8 bar	80XPL	640	NPT1/2	NPT3/8	2.44
DGG100	100:1	2-8 bar	100XPL	800	NPT1/2	NPT3/8	1.92
DGG130	130:1	2-8 bar	130XPL	1040	NPT1/2	M14X1.5	1.47
DGG175	175:1	2-8 bar	175XPL	1400	NPT3/8	M14X1.5	1.14

DGGD Series Liquid CO2 Pumps(Double acting)

Suncenter pump booster pump price owner for pressurization-3

◪ DGGD Series Liquid CO2 Pumps(Double acting) 

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)**
DGGD4	4:1	2-8 bar	4XPL	32	NPT1/2	NPT1/2	70.00
DGGD6	6:1	2-8 bar	6XPL	48	NPT1/2	NPT1/2	48.60
DGGD10	10:1	2-8 bar	10XPL	80	NPT1/2	NPT1/2	30.61
DGGD16	16:1	2-8 bar	16XPL	128	NPT1/2	NPT1/2	19.73
DGGD28	28:1	2-8 bar	28XPL	224	NPT1/2	NPT1/2	11.30
DGGD40	40:1	2-8 bar	40XPL	320	NPT1/2	NPT3/8	7.69
DGGD64	64:1	2-8 bar	64XPL	512	NPT1/2	NPT3/8	4.94
DGGD80	80:1	2-8 bar	80XPL	640	NPT1/2	NPT3/8	3.96
DGGD100	100:1	2-8 bar	100XPL	800	NPT1/2	NPT3/8	3.13
DGGD130	130:1	2-8 bar	130XPL	1040	NPT1/2	M14*1.5	2.40
DGGD175	175:1	2-8 bar	175XPL	1400	NPT3/8	M14*1.5	1.81

Suncenter pump booster pump price owner for pressurization-4

◪ Liquid carbon dioxide booster pump and pressurization equipment, commonly used in carbon dioxide supercritical extraction of various plant extracts, material foaming, and carbon dioxide fire extinguisher filling. Among them, carbon dioxide extraction is often used in biopharmaceuticals. Experimental research works by using a special pump for liquid carbon dioxide to pressurize carbon dioxide to a supercritical state, which is used to decompose various elements in plants for easy extraction.

DGGD series liquid CO2 pump working picture

Suncenter pump booster pump price owner for pressurization-5

◪ DGGD series liquid CO2 pump working picture

features

※ Compressed Air driven - no electricity required (connect to normal air compressor)
※ In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar
※ No airline lubricator required
※ Wide range of models with different ratios
※ Built-in-cooling on most models
※ Easy to install, operate and maintain
※ Best price / performance ratio
※ No heat, flame or spark risk and explosion proof 
※ Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter pump will automatically start, keep the loop pressure constant 
※ Applicable for liquid CO2/liquid+gas mixed CO2/Supercritical CO2
※ For liquid CO2 cylinder transfer/filling
※ For CO2 Fire Extinguisher filling 
※ For Supercritical CO2 extraction

video

Company Features
1. Dongguan Suncenter Fluid Control Equipment Co., Ltd is a leading company in booster pump price production.
2. Over years of marketing, we have established a cooperative relationship with a number of customers and won trustworthy from them. This is evidence of our business strength.
3. Dongguan Suncenter Fluid Control Equipment Co., Ltd contributes to the society with the collective strength of the company. Contact! Dongguan Suncenter Fluid Control Equipment Co., Ltd regards co2 transfer pump as its operation principles. Contact! co2 pump is our biggest source. Contact!

a******w

The design of Suncenter co2 transfer pump is professionally carried out. It is completed by our designers who think twice before the fabric selection, trims, and fixtures of a bag.

y******h

The processes of Suncenter co2 transfer pump involve blending the raw materials, specialized grinding of the raw materials, inert atmosphere firing of the raw materials, and a final grind of the finished product.

v******w

The manufacture of Suncenter booster pump price involves several stages: 3D design, cutting, forming, surface treatments, biocompatibility testing, and assembly.

w******x

The shaping processes of Suncenter co2 pump adopts four general production techniques including extrusion, calendering, coating or molding, and casting.

k******w

The production equipment of Suncenter booster pump price is constantly upgraded. The equipment includes extruder, mixing mill, surfacing lathes, milling machinery, and molding press machinery.

w******r

co2 transfer pump The introduction of multiple automated machinery and equipment for production co2 transfer pump has greatly improved the production accuracy and production efficiency, and effectively reduced the production cost, resulting in the production of co2 transfer pump with a higher overall cost performance.

Product Message

*Name

Phone

*E-mail

*Content