energy saving booster pump system transfer testing for natural gas boosts pressure

Latest products

Hydraulic Pressure Cyclic Test Machine

Suncenter Hydrogen Booster and Filling Machine

Suncenter valve strainer testing machine

Suncenter SST-H300 model flange and welded type Valve Test Bench

Product Information
Feedback

Application Scope

hydro test pump developed and produced by Suncenter Fluid Control Equipment is widely applied to many industries and fields. It can fully meet the diversified needs of customers.Suncenter Fluid Control Equipment always focuses on meeting customers' needs. We are dedicated to providing customers with comprehensive and quality solutions.

Product Comparison

Compared with products in the same category, hydro test pump has the following advantages.

Company Advantages
1. Suncenter co2 filling pump has been tested according to electrical regulations. It is tested in terms of radiated emissions, radiated susceptibility, ESD (electrostatic discharge), electrical transients, etc.
2. This product is known for its system reliability. It can perform the same task endlessly in the same way without loss.
3. The product features a rugged industrial-strength frame. It mainly adopts hot-rolled steel and wrought materials such as stainless steel materials for better resistance to impacts.
4. It promotes quality and tranquil sleep. This ability to obtain a sufficient amount of undisturbed sleep will have an immediate and long-term impact on a person's health.
5. There is a multitude of benefits when manufacturers use this product to upgrade production, such as increased productivity and lowered labor costs.

Air Driven Liquid CO2 Booster Pump-DGG/DGGD Series.

SUNCENTER pumps are air driven at a drive air pressure of 2bar to 8bar by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve.

Suncenter pumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios.Suncenter model numbers reflect the pumps nominal pressure ratios， while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal outlet pressure can be calculated.

Suncenter transfer booster pump system testing for natural gas boosts pressure-1

DGG Series Liquid CO2 Booster Pumps(Single acting)

Suncenter transfer booster pump system testing for natural gas boosts pressure-2

◪ DGG Series Liquid CO2 Booster Pumps(Single acting)  

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)
DGG6	6:1	2-8 bar	6XPL	48	NPT1/2	NPT1/2	29.91
DGG10	10:1	2-8 bar	10XPL	80	NPT1/2	NPT1/2	18.84
DGG16	16:1	2-8 bar	16XPL	128	NPT1/2	NPT1/2	12.42
DGG28	28:1	2-8 bar	28XPL	224	NPT1/2	NPT1/2	7.11
DGG40	40:1	2-8 bar	40XPL	320	NPT1/2	NPT1/2	4.89
DGG64	64:1	2-8 bar	64XPL	512	NPT1/2	NPT3/8	3.08
DGG80	80:1	2-8 bar	80XPL	640	NPT1/2	NPT3/8	2.44
DGG100	100:1	2-8 bar	100XPL	800	NPT1/2	NPT3/8	1.92
DGG130	130:1	2-8 bar	130XPL	1040	NPT1/2	M14X1.5	1.47
DGG175	175:1	2-8 bar	175XPL	1400	NPT3/8	M14X1.5	1.14

DGGD Series Liquid CO2 Pumps(Double acting)

Suncenter transfer booster pump system testing for natural gas boosts pressure-3

◪ DGGD Series Liquid CO2 Pumps(Double acting) 

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)**
DGGD4	4:1	2-8 bar	4XPL	32	NPT1/2	NPT1/2	70.00
DGGD6	6:1	2-8 bar	6XPL	48	NPT1/2	NPT1/2	48.60
DGGD10	10:1	2-8 bar	10XPL	80	NPT1/2	NPT1/2	30.61
DGGD16	16:1	2-8 bar	16XPL	128	NPT1/2	NPT1/2	19.73
DGGD28	28:1	2-8 bar	28XPL	224	NPT1/2	NPT1/2	11.30
DGGD40	40:1	2-8 bar	40XPL	320	NPT1/2	NPT3/8	7.69
DGGD64	64:1	2-8 bar	64XPL	512	NPT1/2	NPT3/8	4.94
DGGD80	80:1	2-8 bar	80XPL	640	NPT1/2	NPT3/8	3.96
DGGD100	100:1	2-8 bar	100XPL	800	NPT1/2	NPT3/8	3.13
DGGD130	130:1	2-8 bar	130XPL	1040	NPT1/2	M14*1.5	2.40
DGGD175	175:1	2-8 bar	175XPL	1400	NPT3/8	M14*1.5	1.81

Suncenter transfer booster pump system testing for natural gas boosts pressure-4

◪ Liquid carbon dioxide booster pump and pressurization equipment, commonly used in carbon dioxide supercritical extraction of various plant extracts, material foaming, and carbon dioxide fire extinguisher filling. Among them, carbon dioxide extraction is often used in biopharmaceuticals. Experimental research works by using a special pump for liquid carbon dioxide to pressurize carbon dioxide to a supercritical state, which is used to decompose various elements in plants for easy extraction.

DGGD series liquid CO2 pump working picture

Suncenter transfer booster pump system testing for natural gas boosts pressure-5

◪ DGGD series liquid CO2 pump working picture

features

※ Compressed Air driven - no electricity required (connect to normal air compressor)
※ In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar
※ No airline lubricator required
※ Wide range of models with different ratios
※ Built-in-cooling on most models
※ Easy to install, operate and maintain
※ Best price / performance ratio
※ No heat, flame or spark risk and explosion proof 
※ Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter pump will automatically start, keep the loop pressure constant 
※ Applicable for liquid CO2/liquid+gas mixed CO2/Supercritical CO2
※ For liquid CO2 cylinder transfer/filling
※ For CO2 Fire Extinguisher filling 
※ For Supercritical CO2 extraction

video

Company Features
1. Dongguan Suncenter Fluid Control Equipment Co., Ltd is a booster pump system production and management enterprise integrating industry and trade.
2. The increasing reputation of our booster pump price also contributes to the application of co2 filling pump technology.
3. Dongguan Suncenter Fluid Control Equipment Co., Ltd firmly believes excellence comes from long-term accumulation. Inquire! Constant improvements in quality and service is Dongguan Suncenter Fluid Control Equipment Co., Ltd's ultimate goal. Inquire! Suncenter strives to be a dominant liquid nitrogen pump manufacturer in the market. Inquire! We always place high quality of co2 pump in first place. Inquire!

w******r

Suncenter booster pump system is available in numerous design styles. Hanway has 180T,280T,400T,500T,1000T die casting machine

b******t

Suncenter booster pump price is carefully designed and crafted. Quality first is very important for Hanway

d******o

We design Suncenter booster pump system focusing on reducing environmental impacts throughout its life cycle. Hanway has 180T,280T,400T,500T,1000T die casting machine

u******e

The adoption of advanced technology gives Suncenter liquid nitrogen pump a good surface finish. Hanway will as always, pursue excellence with its own ability to win the recognition of clients in the world

v******y

Suncenter co2 filling pump is made by highly skilled and experienced professionals using the optimum quality raw material. More CNC are applied in the secondary processing to meet high accuracy demands

i******a

It is being improved and updated based on innovative technologies. Hanway will as always, pursue excellence with its own ability to win the recognition of clients in the world

Product Message

*Name

Phone

*E-mail

*Content