Become the first-class high pressure fluid control expert in the world

sales@chinasuncenter.com

air driven liquid pump pneumatic types for metallurgy-Suncenter-imgEnglish
Suncenter  > 

AI - Page Sitemap

 > 

air driven liquid pump pneumatic types for metallurgy

air driven liquid pump pneumatic types for metallurgy

Air driven liquid pump pneumatic types for metallurgy

MOQ
1 Set
Brand Name
SUNCENTER
Certificate
ISO/CE/SGS
Warranty
13 Months
Packaging
by Plywood case
Shipping Port
Shenzhen/Hongkong
Payment
T/T,Western Union,Credit card.
Transaction method
EXW,FOB,DDP,CIF,CFR
Place of Origin
Guangdong Province, China (Mainland)
Delivery Time
Within 10-15 working days after received deposit.
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:

Compressed Air Driven Hydraulic Pump-DGG Series


We offer the most complete range of Air driven liquid pump models in the industry measured for:


Capability of ultimate pressure, flow or output horsepower.
++
air driven liquid pump pneumatic types for metallurgy-1
Compatibility with a broad variety of liquids, such as oil, water and chemical applications.
++


SUNCENTER pumps are air driven at a drive air pressure of 1bar to 8bar (14.5 psi to116 psi) by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve.


Suncenter pumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios.Suncenter model numbers reflect the pumps nominal pressure ratios, while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal liquid pressure can be calculated.


SUNCENTER pumps are self priming. In general it is not necessary to use an air line lubricator. The liquid to be pumped flows into the suction chamber by the up-stroke of the drive piston. By this suction effect, the inlet check valve is opened and the outlet check valve is closed. The down-stroke generates the pressure at the liquid side. The inlet check valve is closed and the outlet check valve is opened by the generated pressure. SUNCENTER liquid pumps cycle automatically, where the pressure is built up the numbers of cycles slow down, the pump stops automatically when the output pressure forces are equal. The pump restarts with a slight drop in the outlet pressure or an increase in the air drive pressure. Pump performance can be affected by a number of conditions, such as freezing of muffler or pilot valves (which is caused by moisture in air lines), inadequate inlet air line sizes and dirty filers. Don’t reduce the indicated port sizes and consult SUNCENTER for exact flow conditions not shown in charts.


air driven liquid pump pneumatic types for metallurgy-2



DGG Series Liquid Pumps(Single acting, single air drive head)


air driven liquid pump pneumatic types for metallurgy-3
  • DGG pumps have aluminum bodies and wetted materials of stainless steel or carbon steel ,which  depends on different service liquid. Materials of stainless steel, make them an excellent choice of water application. High quality seals, long service life available.


Model

Pressure  Boost Ratio

Driven air pressure PL 

Formula to calculate outlet pressure

MAX Outlet
     Pressure(bar)*

Liquid inlet Connection

Liquid outlet Connection

MAX Flow (L/min) 

DGG6

6:1

2-8 bar

6XPL

48

NPT1/2

NPT1/2

29.91

DGG10

10:1

2-8 bar

10XPL

80

NPT1/2

NPT1/2

18.84

DGG16

16:1

2-8 bar

16XPL

128

NPT1/2

NPT1/2

12.42

DGG28

28:1

2-8 bar

28XPL

224

NPT1/2

NPT1/2

7.11

DGG40

40:1

2-8 bar

40XPL

320

NPT1/2

NPT1/2

4.89

DGG64

64:1

2-8 bar

64XPL

512

NPT1/2

NPT3/8

3.08

DGG80

80:1

2-8 bar

80XPL

640

NPT1/2

NPT3/8

2.44

DGG100

100:1

2-8 bar

100XPL

800

NPT1/2

NPT3/8

1.92

DGG130

130:1

2-8 bar

130XPL

1040

NPT1/2

M14X1.5

1.47

DGG175

175:1

2-8 bar

175XPL

1400

NPT3/8

M14X1.5

1.14

DGG255

255:1

2-8 bar

255XPL

2040

NPT1/4

M14X1.5

0.75

DGG400

400:1

2-8 bar

400XPL

3200

NPT1/4

M14X1.5

0.48

DGG510

510:1

2-8 bar

510XPL

4080

NPT1/4

M14X1.5

0.65

DGG800

800:1

2-8 bar

800XPL

6400

NPT1/4

M14X1.5

0.42


DLS Liquid (hydraulic) booster system = Liquid pump+ following valves, gages, and parts


air driven liquid pump pneumatic types for metallurgy-4
  • The standard liquid pump system including following parts:

  • Air –driven liquid booster pump (DGM/DGG/DGGD Three series for choosing)

  • Stainless steel (carbon steel) material cabinet (Three models for choosing)

  • F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)

  • Driven air switch (Pump starting switch), driven air pressure gauge, water tank

  • Liquid inlet/outlet switch, high pressure liquid guage, unloading valve, interconnecting pipes etc.

  • And we could also customize it according to clients’ special requirement.


DLS series Liquid Pressure Booster Pump System-The hottest selling Model C cabinet


air driven liquid pump pneumatic types for metallurgy-5
  • DLS series Liquid Pressure Booster Pump System-The hottest selling Model C cabinet



Suncenter DLS Series Pneumatic (Air driven) Liquid Booster System


Suncenter- DLS Series Pneumatic(Air driven) Hydraulic Power Packs


SUNCENTER- Hydraulic power packs(Liquid pump system) are compact and delicacy solution tailored to customer specific requirements with air driven liquid pumps as well as all accessories to be fitted and installed on the frame or in closed cabinet.


To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator. The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure. SUNCENTER Hydraulic power packs are available with wide range of pressure ratios make these series of pumps ideal for powering a variety of oil/hydraulic operations. The maximum operating pressure up to 640 MPa.


As the pressure will be generated by means of a pneumatically operated pump,the electric connection will not be necessary. To operate this system, the air driven liquid pump have to be equipped with the air control unit combined filter and water separator, pressure-regulating valve, pressure control gauge as well as manual relieve valve. In this operation, the pump will be mounted to the stainless steel tank in the closed cabinet in a compact and space saving manner. Pressure gauges, valves and pressure regulators will be fitted on panel.


The desired operating pressure can be attained by adjusting the driving air pressure. When the driving air pressure and the output pressure reach the balance, the pump stops filling pressure and the output pressure stays at the preset value. This hydraulic unit can be used for all kinds of pressure testing and test tools for research and test institutes or for other functions requiring a determined pressure. 


air driven liquid pump pneumatic types for metallurgy-6



features

  •   Compressed Air driven - no electricity required (connect to normal air compressor)

  •   In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar

  •   No airline lubricator required

  •   Pressures to 640Mpa (6400 bar)

  •   Wide range of models with different ratios

  •   Built-in-cooling on most models

  •   Easy to install, operate and maintain

  •   Best price / performance ratio

  •   No heat, flame or spark risk and explosion proof

  •   Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter   pump will automatically start, keep the loop pressure constant


video





Suncenter air powered hydraulic pump is designed by the elite design team based on user demand. The programmable coin acceptor makes it easy to monetize your next project
Our air powered hydraulic pump designed for foreign customers are all unique and very successful. With high technology "wireless" anti-theft system for all-round collection security and protection
Suncenter air driven liquid pump is produced under standard 5S operating environment. BLEE bill acceptors are designed for easy installation and simple maintenance
Suncenter air powered hydraulic pump is known for excellent quality and reliable performance. Features high visibility flashing LED lights to draw attention and increase sales
The designs and colors of air powered hydraulic pump are air driven liquid pump, which presents the personality and style. Direct sales of BLEE products can be offered to customers
The product is non-toxic. Its materials have gone through toxic removing or eliminating treatments to make sure it is safe to use. Free firmware and dataset for new currency and product improvement
The product is known for excellent wear and tear resistance. It can stand up heavy daily use yet will not become age after used for a period of time. Direct sales of BLEE products can be offered to customers
The product has a smooth surface. In the polishing stage, the sand holes, air blisters, pocking mark, burrs, or black spots are all eliminated. The card reader of BLEE features in compact size with elegant outlook
The product is designed to orient to users. Its functions and practicality are created according to the user’s postures. BLEE provides a large range of electronic accessories to meet your specific requirement
The product is distinguished by good luster on the surface. The surface polishing treatment has removed any defections and improved its finish. Electronic multi-coin acceptor matches different countries' coin and can insert coins smoothly
This product is not afraid of temperature variations. Its materials are pre-tested to ensure stable physical and chemical properties under different temperatures. It is fully programmable so that you’re not limited to any particular type of currency
Thanks to its lasting strength and enduring beauty, this product can be fully repaired or restored with the right tools and skills, which is easy to maintain. With volume adjustable button & credit button inside, it is user-friendly
This product appeal to people's particular style and senses in no doubt. It helps people set up their place that is comfortable. The logo, size and material of token coins can be customized
The most intrinsic benefit of using this product is that it will promote a relaxing atmosphere. Applying this product will give off a relaxing and comfortable vibe. Both arcade push button and joystick can be used in wood or metal control panels
People can consider this product as a smart investment because people can be sure that it will last for a long time with maximum beauty and comfort. The wires of each product are durable
This product is durable enough to stand up to normal use, while also adhering to the end consumer’s design and materials standards. Free firmware and dataset for new currency and product improvement
The advantages of this product are undeniable. Combining with other types of furniture, this product will add warmth and character to any room. Currency dataset can be changed by the PC based management software and connection cable
Product Message
Chat Online inputting...