Become the first-class high pressure fluid control expert in the world

Home  > PRODUCTS  > Gas Booster  > Gas booster pump  > 

DGA Series gas booster pump with max 800 bar outlet pressure

DGA Series gas booster pump with max 800 bar outlet pressure

DGA Series gas booster pump with max 800 bar outlet pressure

Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:

Compressed Air Driven Gas Booster Pump- DGA/DGD/DGT Series

Suncenter Air Driven Gas Boosters provide for pressures up to 80Mpa (11,600 psi). Used for virtually all known gases, these boosters are ideal for increasing gas pressure, transferring high pressure gas, charging cylinders and scavenging. Key features include: 

Compressed Air driven - no electricity required (connect to normal air compressor)
In order to extend the lifetime of the pump, the driving air pressure should 
not be higher than 8 bar
No airline lubricator required 
Hydrocarbon free - separation between air and gas sections 
Pressures to 80Mpa (11,600 psi)  
Wide range of models with different ratios
Built-in-cooling on most models 
Easy to install, operate and maintain
Best price / performance ratio 
No heat, flame or spark risk and explosion proof 
Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter   pump will automatically start, keep the loop pressure constant
Applicable gas:Air/Ar(Argon)/He(Helium)/H2(Hydrogen)/O2(Oxygen)N2(Nitrogen)
CO2/NO2/CH4/C2H2/LNG/LPG/CNG/FM200/SF6/H2S etc

Applications for Air Driven Gas Boosters

SUNCENTER Air Driven Gas Boosters provide for pressures up to 80Mpa. Used for oil free compression not only of air or Nitrogen, but also flammable and risk gases like hydrogen, oxygen and natural gas. These boosters are ideal for increasing gas pressure, transferring high pressure gas, charging cylinders and scavenging.

 

Air driven boosters are an efficient alternative instead of electrically driven products and can be used in explosion- proof areas.

 

As a result of the wide range of models it is possible to select the optimum booster for each application. Single stage, double acting or two stage boosters or a combination of these models can be used to achieve different operating pressures and flow capacities.

 

SUNCENTER Air Driven Gas Boosters are ideal and widely used for hydrostatic and burst testing for valves, pipes, tubing and pressure vessels; Calibration for safety valves; Automobile regulator detecting and telecommunication cable inflatable appliances. 

Applications 

Pressure test with gas/air
Gas transfer and filling
(Air/Argon/Helium/Hydrogen/Oxygen/Nitrogen/CO2/NO2/CH4/LNG/LPG/CNG/FM200 etc.)
Charging of gas cylinder and accumulator with nitrogen
Nitrogen gas spring charging
Supply for isolating gas systems
Gas assisted injection molding
Transfer of oxygen cylinders
Charging of breathing air bottles
Leak test 
Hydrostatic Testing for valves, tanks, pressure vessels, pressure switches, hoses, pipes and tubing, pressure gauges, cylinders, transducers, well casings, BOPs, gas bottles and air craft components
Safety valve adjusting 

DGA series gas booster pumps(Single acting, single air drive head): 

DGA pumps are available with high quality seals, which provide significantly better service life as well. Pump head fitted with exhaust cooling devices. All parts in contact with the gas are made of stainless steel. 

* technical parameters

Driven source: clean compressed air

Air pressure control system

Drive compressed air pressure: 2-8bar (recommended drive pressure <8bar)

Boost Ratio:5:1

Maximum flow rate : 820L/min

Maximum air output pressure: 40bar.

Applicable medium: clean air

Air inlet minimum pressure: 2bar

It is our mission to offer you bread with love. Bread, in its pure original formula, making it available for everyone's enjoyment. From antiquity,bread has been known as the epitome of life and human society. It's history can be traced back for thousands of years to the ancient Egyptians, Romans and Greeks.
But I must explain to you how all this mistaken idea of denouncing pleasure and praising pain was born and I will give you a complete account of the system, and expound the actual teachings.

Technical specification for DGA Series:

(Note: PL: driven air pressure   PA: gas inlet pressure   PB: gas outlet pressure)


Model

Pressure boost ratio

Min. gas
Inlet pressure
PA (bar)

Max.gas
Inlet pressure
PA (bar)

Max. gas
outlet pressure PB (bar)

 

Driven air pressure  PL

Formula to
calculate gas outlet pressure PB

Connection:
Gas Inlet /
Gas outlet (NPT thread)

Max. flow at driven air pressure of 6bar (L/min)

DGA02

2:1

1.0

16

16

2bar-8 bar

2X PL

1/2 / 1/2

960 (at PA of 6 bar )

DGA05

5:1

0

40

40

2bar-8 bar

5XPL

1/2 / 1/2

680(at PA of 6 bar )

DGA06

6:1

2.0

48

48

2bar-8 bar

6XPL

1/2 / 1/2

360(at PA of 10 bar )

DGA10

10:1

3.5

80

80

2bar-8 bar

10XPL

3/8/ 3/8

210(at PA of 10 bar )

DGA15

15:1

3.5

120

120

2bar-8 bar

15XPL

3/8/ 3/8

190(at PA of 10 bar )

DGA25

25:1

7.0

200

200

2bar-8 bar

25XPL

1/4/ 1/4

120(at PA of 20 bar )

DGA40

40:1

10

320

320

2bar-8 bar

40XPL

1/4/ 1/4

200(at PA of 40 bar )

DGA60

60:1

20

480

480

2bar-8 bar

60XPL

1/4/ 1/4

180(at PA of 40 bar )

DGA100

100:1

25

800

800

2bar-8 bar

100XPL

1/4/ M14X1.5

136(at PA of 40 bar )

DGD series gas booster pumps(Double acting ):

DGD series pumps are double acting, with single air driven heads type.   
DGD pumps are available with high quality seals, which provide significantly better service life
Double pump heads with exhaust cooling devices. 
All components in contact with the gas are made of stainless steel. 
Pipes mounting way are available as customized. 

Technical specification for DGD Series:

(Note: PL: driven air pressure   PA: gas inlet pressure   PB: gas outlet pressure)


Model

Pressure    boost ratio

Min. gas
Inlet pressure
PA    (bar)

Max.gas
Inlet pressure
PA    (bar)

Max. gas
outlet    pressure PB (bar)

 

Driven air    pressure  PL

Formula to
calculate    gas outlet pressure PB

Connection:
Gas Inlet    /
Gas outlet    (NPT thread)

Max. flow    at driven air pressure of 6bar (L/min)

DGD10

10:1

3.5

80

80

2bar-8 bar

10XPL+ PA

3/8/3/8

410(at PA    of 6 bar )

DGD15

15:1

5

120

120

2bar-8 bar

15XPL+ PA

3/8/3/8

350 (at PA    of 6 bar )

DGD25

25:1

10

200

200

2bar-8 bar

25XPL+ PA

1/4/1/4

396(at PA    of 20 bar )

DGD40

40:1

15

320

320

2bar-8 bar

40XPL+ PA

1/4/1/4

320(at PA    of 40 bar )

DGD60

60:1

25

480

480

2bar-8 bar

60XPL+ PA

1/4/1/4

215(at PA    of 40 bar )

DGD100

100:1

35

800

800

2bar-8 bar

100XPL+ PA

1/4/M14*1.5

300(at PA    of 60 bar )

DGD120

120:1

50

960

960

2bar-8 bar

120XPL+ PA

1/4/M14*1.5

180(at PA    of 60 bar )

DGT series gas booster pumps(Double acting, double stage, single air drive head ):

DGT pumps are double acting, double stage with single air drive head pumps. They can provide for super high pressure with very low inlet pressure. 
DGT pumps are available with high quality seals, which provide significantly better service life 
All parts in contact with the gas are made of stainless steel.

Technical specification for DGT Series:

(Note: PL: driven air pressure   PA: gas inlet pressure   PB: gas outlet pressure)


Model

Pressure boost ratio

Min. gas
Inlet pressure
PA (bar)

Max.gas
Inlet pressure
PA (bar)

Max. gas
outlet pressure PB (bar)

 

Driven air pressure     PL

Formula to
calculate gas outlet pressure PB

Connection:
Gas Inlet /
Gas outlet (NPT thread)

Max. flow at driven air pressure of 6bar (L/min)

DGT15

15:1

0.1

56

120

2-8 bar

15XPL

3/8/ 1/4

230(at PA of 8 bar )

DGT25

25:1

0.1

10

200

2-8 bar

25XPL

3/8/ 1/4

156(at PA of 8 bar )

DGT7/25

25:1

5

56

200

2-8 bar

25XPL

3/8/ 1/4

156(at PA of 8 bar )

DGT40

40:1

0.1

10

320

2-8 bar

40XPL

3/8/ 1/4

124(at PA of 8 bar )

DGT15/40

40:1

5

120

320

2-8 bar

40XPL

3/8/ 1/4

124(at PA of 8 bar )

DGT60

60:1

0.1

10

480

2-8 bar

60XPL

3/8/ 1/4

80(at PA of 15 bar )

DGT15/60

60:1

6

120

480

2-8 bar

60XPL

3/8/ 1/4

80(at PA of 15 bar )

DGT100

100:1

0.1

10

800

2-8 bar

100XPL

3/8/ 1/4

63(at PA of 8 bar )


Suncenter DGS Series Pneumatic (Air driven) Gas Booster Pump System

 

DGS gas booster system = gas booster pump+ following valves, gauges, and parts

 

Suncenter - Pneumatic gas booster system are compact and delicacy solution tailored to customer specific requirements with gas boosters as well as all accessories to be fitted and installed in the frame or a closed cabinet.

To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator.

The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure.

Suncenter - Pneumatic booster system are used for oil free compression of clean shop air as well as industrial gases like Argon, Helium, Oxygen, Hydrogen and Nitrogen,CO2, etc..Driven air from 3 bar to 8 bar (from air compressor).

 

Operating pressure up to 80 MPa, for higher pressure, pump with double driven heads is an ideal option. 

Pressure test with gas
Gas transfer and filling
(Argon/Helium/Hydrogen/Oxygen/Nitrogen/CO2/NO2/CH4/LNG/LPG/CNG/FM200 etc.)
Charging of gas cylinder and accumulator with nitrogen
Supply for isolating gas systems
Gas assisted injection molding
Transfer of oxygen cylinders
Charging of breathing air bottles
Leak test 
Hydrostatic Testing for valves, tanks, pressure vessels, pressure switches, hoses, pipes and tubing, pressure gauges, cylinders, transducers, well casings, BOPs, gas bottles and air craft components
Safety valve adjusting 

Air –driven gas booster pump (DGA/DGD/DGT three series for choosing)

 

Stainless steel (carbon steel) material cabinet (Three models for choosing)

 

F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)

 

Driven air switch (Pump starting switch), driven air pressure gauge

 

Gas inlet switch, Gas inlet pressure gauge

 

Gas outlet switch, Gas outlet pressure gauge,  unloading valve, interconnecting pipes etc.

 

And we could also customize it according to clients’ special requirement.

 

DGT series gas booster working picture

Oxygen gas pressure booster for cylinder transfer and filling

Favorable rate
100%
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
社媒暂无评论
Chat Online 编辑模式下无法使用
Leave Your Message inputting...