high quality pressure booster pump system type for safety valve calibration

Gas booster pressure test bench

Suncenter - Air/Gas pressure test bench are compact and delicacy solution tailored to customer specific requirements with gas(air) boosters as well as all accessories to be fitted and installed in the frame or a closed cabinet.

To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator.

The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure.

Operating pressure up to 80 MPa, for higher pressure, pump with double driven heads is an ideal option.

high quality pressure booster pump system type for safety valve calibration-1

The hottest selling- Model C frame type cabinet picture

high quality pressure booster pump system type for safety valve calibration-2

◪ The standard gas booster pumps system including following parts:
◪ Air –driven gas booster pump (DGA/DGD/DGT three series for choosing)
◪ Stainless steel (carbon steel) material cabinet (Three models for choosing)
◪ F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)
◪ Driven air switch (Pump starting switch), driven air pressure gauge
◪ Gas inlet switch, Gas inlet pressure gauge
◪ Gas outlet switch, Gas outlet pressure gauge, unloading valve, interconnecting pipes etc.
◪ And we could also customize it according to clients’ special requirement.

high quality pressure booster pump system type for safety valve calibration-3

◪ DGS series air/gas pressure test bench with round chart recorder

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (ZG thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGA02	2：1	1.0	16	16	2-8 bar	2X PL	1/2 / 1/2	960 (at PA of 6 bar )
DGS-DGA05	5：1	0	40	40	2-8 bar	5XPL	1/2 / 1/2	680(at PA of 6 bar )
DGS-DGA10	10：1	3.5	80	80	2-8 bar	10XPL	3/8/ 3/8	210(at PA of 10 bar )
DGS-DGA25	25：1	7.0	200	200	2-8 bar	25XPL	1/4/ 1/4	120(at PA of 20 bar )
DGS-DGA40	40：1	10	320	320	2-8 bar	40XPL	1/4/ 1/4	200(at PA of 40 bar )
DGS-DGA60	60：1	20	480	480	2-8 bar	60XPL	1/4/ 1/4	180(at PA of 40 bar )
DGS-DGA100	100：1	25	800	800	2-8 bar	100XPL	1/4/ M14X1.5	136(at PA of 40 bar )
DGS-DGA130	130：1	35	800	1040	2-8 bar	130XPL	1/4/ M14X1.5	120(at PA of 40 bar )

Technical specification for DGS-DGD series

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (ZG thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGD10	10:1	3.5	80	80	2-8 bar	10XPL+ PA	3/8/3/8	410(at PA of 6 bar )
DGS-DGD25	25:1	10	200	200	2-8 bar	25XPL+ PA	1/4/1/4	396(at PA of 20 bar )
DGS-DGD40	40:1	15	320	320	2-8 bar	40XPL+ PA	1/4/1/4	320(at PA of 40 bar )
DGS-DGD60	60:1	25	480	480	2-8 bar	60XPL+ PA	1/4/1/4	215(at PA of 40 bar )
DGS-DGD100	100:1	35	800	800	2-8 bar	100XPL+ PA	1/4/M14*1.5	300(at PA of 60 bar )

Technical specification for DGS-DGT series

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (ZG thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGT25	25:1	0.1	10	200	2-8 bar	25XPL+3.5XPA	1/4/ 1/4	136(at PA of 8 bar )
DGS-DGT40	40:1	0.1	10	320	2-8 bar	40XPL+ 6XPA	1/4/1/4	124(at PA of 8 bar )
DGS-DGT10/60	10:1/60:1	0.1	10	480	2-8 bar	60XPL+6X PA	1/4/1/4	84(at PA of 8 bar )
DGS-DGT25/60	25:1/60:1	10	25	480	2-8 bar	60XPL+2.5XPA	1/4/1/4	80(at PA of 15 bar )
DGS-DGT100	100:1	0.1	10	800	2-8 bar	100XPL+10XPA	1/4/ M14*1.5	63(at PA of 8 bar )

video

j******a

Suncenter hydraulic pump test bench is of green design. It meets standards of energy-efficient building design, building code development, and energy efficiency policy development. It can be designed with the front bumper to minimize walkway damage

n******w

The chemicals used to the color of Suncenter hydraulic pump test bench do not include formaldehyde, chlorine bleach, carcinogenic and allergy-inducing dyes, all of which are known to be damaging to human health. It can be designed with the front bumper to minimize walkway damage

d******q

Suncenter pressure booster pump has passed performance tests and quality assurance tests in the phone accessory industry. It is certified under CCC, CE, UL, and GOST. It makes passenger's takeoff smooth and easy

a******x

During production, Suncenter hydraulic pump test bench adopts a series of advanced machines, including CNC machine tools, power presses, plastics injection-molding machines and so on. It can be designed with the front bumper to minimize walkway damage

t******d

The raw materials used in Suncenter hydraulic pump test bench are strictly selected and inspected. Any materials such as mercury and lead will be excluded to prevent any environmental pollution and health risk. Its metal parts are electropolished for being robust and corrosion-resistant

n******o

Excellent structural strength is one of the obvious advantages of this product. It has been verified with the ability to endure the heavy load working conditions. It is used to service the aircraft/passenger between flights

Product Message

*Name

Phone

*E-mail

*Content