Oil natural gas booster pump unit electrical safety operation procedures? power unit is composed of machine, electricity, liquid, instrument as one of the new type hoisting machinery, hydraulic cylinder as the main body, oil pump, crude motivation, oil tank, oil filter, combination of hydraulic control valve assembly. Working principle is based on the motor power supply, motor drive the two-way pump output pressure oil, driven by hydraulic integrated block element to control the valve opening and closing of the piston rod. Is composed of machine, electricity, liquid, instrument as one of the new type hoisting machinery, hydraulic cylinder as the main body, oil pump, coarse motive, oil tank, oil filter, hydraulic control valve combination of the assembly. Working principle is based on the motor power supply, motor drive the two-way natural gas booster pump output pressure oil, driven by hydraulic integrated block element to control the valve opening and closing of the piston rod. Motor, oil natural gas booster pump, hydraulic control valve and hydraulic cylinder can be installed on the same axis, a. Will be effected according to the procedures and conditions prescribed by the automatic or manual control butterfly-valve ( Ball valve) The opening and closing. And can adjust the opening and closing speed; b。 Satiety unit of butterfly-valve ( Ball valve) Moving water closing and closing time requirements; c。 Butterfly-valve after opening, closing, should be automatic locking, keep its position unchanged; Butterfly-valve during opening and closing the lock ingot is not allowed to misoperation; d。 Butterfly-valve ( Ball valve) After opening, closing, should cut off oil source; e. Butterfly-valve ( Ball valve) By the end of the opening and closing, can automatically sends a signal to; f。 Butterfly-valve ( Ball valve) System use the oil box, when higher oil level to the specified value, can automatically control the pump discharge of oil; When the oil level is too high, signal; g。 Shaft end seal belt around butterfly-valve ( Ball valve) In the open and closed at the end, should be automatic inflatable at the shaft end; , at the beginning of the opening and closing round belt should be automatically deflated. Keywords: oil pump power plant, the axial plunger pump manufacturers, axial plunger pump manufacturers
Dongguan Suncenter Fluid Control Equipment Co., Ltd is dedicated to servicing our customers with a wide array of high-quality service and products.
See reviews of the latest trend in gas booster industry at Suncenter Fluid Control Equipment, and see the best that work in just minutes! Visit us right away!
We focus on operational procedure and manufacturing facilities of gas booster.