energy saving hydraulic test bench bench marketing for safety valve calibration

Latest products

Ultra High Pressure Gas Booster System

Refrigerant Filling Pump

Portable Safety Valve Test Bench

Automatic CO2 Extinguisher Filling Machine

Product Information
Feedback

Product Comparison

Compared with products in the same category,Suncenter Fluid Control Equipment's hydro test pump's outstanding advantages are as follows.

Company Advantages
1. The packaging quality is important for Suncenter hydraulic test bench . Its packaging materials comply with EU packaging materials and waste directive for the battery.
2. It is properly reflective. Made of a special material with a fine structure, it bundles the projected light and reflects without degrading the quality.
3. The product is not prone to corrosion. It adopts anodized aluminum frames and aluminum trims, which are able to withstand the environmental elements.
4. Due to its remarkable advantages in the market, the product enjoys a great market prospect.

Gas booster pump system

Suncenter - Gas booster systems are compact and delicacy solution tailored to customer specific requirements with gas boosters as well as all accessories to be fitted and installed in the frame or a closed cabinet.

To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator.

The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure.

Suncenter - Pneumatic booster system are used for oil free compression of clean shop air as well as industrial gases like Argon, Helium, Oxygen, Hydrogen and Nitrogen,CO2, etc..Driven air from 3 bar to 8 bar (from air compressor).

Operating pressure up to 80 MPa, for higher pressure, pump with double driven heads is an ideal option.

Suncenter DGS Series Pneumatic (Air driven) Gas Booster Pump System

Suncenter bench hydraulic test bench marketing for safety valve calibration-1

DGS booster system = booster pump+ following valves, gages, and parts

Suncenter bench hydraulic test bench marketing for safety valve calibration-2

The hottest selling- model A and model C cabinet picture

Suncenter bench hydraulic test bench marketing for safety valve calibration-3

◪ The standard gas booster pumps system including following parts:
◪ Air –driven gas booster pump (DGA/DGD/DGT three series for choosing)
◪ Stainless steel (carbon steel) material cabinet (Three models for choosing)
◪ F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)
◪ Driven air switch (Pump starting switch), driven air pressure gauge
◪ Gas inlet switch, Gas inlet pressure gauge
◪ Gas outlet switch, Gas outlet pressure gauge, unloading valve, interconnecting pipes etc.
◪ And we could also customize it according to clients’ special requirement.

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGA02	2：1	1.0	16	16	2bar-8 bar	2X PL	1/2 / 1/2	960 (at PA of 6 bar )
DGS-DGA05	5：1	0	40	40	2bar-8 bar	5XPL	1/2 / 1/2	680(at PA of 6 bar )
DGS-DGA06	6：1	2.0	48	48	2bar-8 bar	6XPL	1/2 / 1/2	360(at PA of 10 bar )
DGS-DGA10	10：1	3.5	80	80	2bar-8 bar	10XPL	3/8/ 3/8	210(at PA of 10 bar )
DGS-DGA15	15：1	3.5	120	120	2bar-8 bar	15XPL	3/8/ 3/8	190(at PA of 10 bar )
DGS-DGA25	25：1	7.0	200	200	2bar-8 bar	25XPL	1/4/ 1/4	120(at PA of 20 bar )
DGS-DGA40	40：1	10	320	320	2bar-8 bar	40XPL	1/4/ 1/4	200(at PA of 40 bar )
DGS-DGA60	60：1	20	480	480	2bar-8 bar	60XPL	1/4/ 1/4	180(at PA of 40 bar )
DGS-DGA100	100：1	25	800	800	2bar-8 bar	100XPL	1/4/ M14X1.5	136(at PA of 40 bar )

Technical specification for DGS-DGD Series:

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGD10	10:1	3.5	80	80	2bar-8 bar	10XPL+ PA	3/8/3/8	410(at PA of 6 bar )
DGS-DGD15	15:1	5	120	120	2bar-8 bar	15XPL+ PA	3/8/3/8	350 (at PA of 6 bar )
DGS-DGD25	25:1	10	200	200	2bar-8 bar	25XPL+ PA	1/4/1/4	396(at PA of 20 bar )
DGS-DGD40	40:1	15	320	320	2bar-8 bar	40XPL+ PA	1/4/1/4	320(at PA of 40 bar )
DGS-DGD60	60:1	25	480	480	2bar-8 bar	60XPL+ PA	1/4/1/4	215(at PA of 40 bar )
DGS-DGD100	100:1	35	800	800	2bar-8 bar	100XPL+ PA	1/4/M14*1.5	300(at PA of 60 bar )
DGS-DGD130	130:1	50	1040	1040	2bar-8 bar	130XPL+ PA	1/4/M14*1.5	180(at PA of 60 bar )

Technical specification for DGS-2DGD Series:

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-2DGD10	10:1	3	80	80	2bar-8 bar	10XPL+ PA	1/2 / 1/2	980(at PA of 6 bar )
DGS-2DGD25	25:1	6	200	200	2bar-8 bar	25XPL+ PA	3/8 / 3/8	560(at PA of 10 bar )
DGS-2DGD40	40:1	25	320	320	2bar-8 bar	40XPL+ PA	3/8 / 3/8	480(at PA of 40 bar )
DGS-2DGD60	60:1	30	480	480	2bar-8 bar	60XPL+ PA	3/8 / 3/8	320(at PA of 40 bar )

Technical specification for DGS-DGT Series:

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGT15	15:1	0.1	56	120	2-8 bar	15XPL	3/8/ 1/4	230(at PA of 8 bar )
DGS-DGT25	25:1	0.1	10	200	2-8 bar	25XPL	3/8/ 1/4	156(at PA of 8 bar )
DGS-DGT7/25	25:1	5	56	200	2-8 bar	25XPL	3/8/ 1/4	156(at PA of 8 bar )
DGS-DGT40	40:1	0.1	10	320	2-8 bar	40XPL	3/8/ 1/4	124(at PA of 8 bar )
DGS-DGT15/40	40:1	5	120	320	2-8 bar	40XPL	3/8/ 1/4	124(at PA of 8 bar )
DGS-DGT60	60:1	0.1	10	480	2-8 bar	60XPL	3/8/ 1/4	80(at PA of 15 bar )
DGS-DGT15/60	60:1	6	120	480	2-8 bar	60XPL	3/8/ 1/4	80(at PA of 15 bar )
DGS-DGT100	100:1	0.1	10	800	2-8 bar	100XPL	3/8/ 1/4	63(at PA of 8 bar )

Technical specification for DGS-2DGT series:

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-2DGT7/15	15:1	4	56	120	2bar-8 bar	15XPL	3/8 / 3/8	430(at PA of 10 bar )
DGS-2DGT7/25	25:1	5	56	200	2bar-8 bar	25XPL	3/8 / 3/8	300(at PA of 10 bar )
DGS-2DGT15/40	40:1	7	120	320	2bar-8 bar	40XPL	3/8 / 3/8	180(at PA of 10 bar )
DGS-2DGT15/60	60:1	7	120	480	2bar-8 bar	60XPL	3/8 / 3/8	120(at PA of 10 bar )

Suncenter bench hydraulic test bench marketing for safety valve calibration-4

Suncenter bench hydraulic test bench marketing for safety valve calibration-5

◪ DGS series gas boosters working pictures

Suncenter bench hydraulic test bench marketing for safety valve calibration-6

DGS-DGD40 gas booster system for nitrogen gas spring filling

Suncenter bench hydraulic test bench marketing for safety valve calibration-7

DGS-DGT series gas boosters for gas cylinder transfer and filling

video

Company Features
1. Dongguan Suncenter Fluid Control Equipment Co., Ltd has developed into a global leader in the field of gas pressure testing.
2. Suncenter has established its own technology center to meet the needs of competitive industries.
3. Complying with the tenet of hydraulic test bench helps Suncenter grow more in this market. Contact! Dongguan Suncenter Fluid Control Equipment Co., Ltd always keep pneumatic test bench as its management tenet. Contact! Our core value is to provide the highest gas booster system and finest air pressure testing . Contact! It is widely admitted that Suncenter has been always sticking to the tenet of gas booster compressor . Contact!

t******e

pneumatic test bench is designed as gas booster system and provides gas booster system solution. Hookay Chair, the best ergonomic chair manufacturer, is specialized in ergonomic office chairs since 2010

a******w

hydraulic test bench realizing the hope of gas pressure testing. Hookay Chair, the best ergonomic chair manufacturer, is specialized in ergonomic office chairs since 2010

u******j

pneumatic test bench takes the advantages of pneumatic test bench. Hookay Chair, the best ergonomic chair manufacturer, is specialized in ergonomic office chairs since 2010

e******k

The material of gas pressure testing allows gas booster compressor to make itself gas booster compressor. Hookay Chair is dedicated to research, development, design, and manufacturing of high-end ergonomic chairs , ergonomic desk chair, ergonomic office chairs,office chairs, mesh chairs , executive office chairs to global customers

e******r

For its material, we used hydraulic test bench that was typical for air pressure testing because it is hydraulic test bench. Hookay Chair is dedicated to research, development, design, and manufacturing of high-end ergonomic chairs , ergonomic desk chair, ergonomic office chairs,office chairs, mesh chairs , executive office chairs to global customers

s******a

Dongguan Suncenter Fluid Control Equipment Co., Ltd has established a good cooperative relationship with many suppliers, the raw material procurement channels are stable, and raw materials of good quality and reasonable price can be obtained at any time, which reduces the production cost of gas booster compressor to a certain extent. Compared with other similar products, Our gas booster compressor is more affordable.

Product Message

*Name

Phone

*E-mail

*Content