Company Advantages
1. Suncenter maximator air driven liquid pump is manufactured using a variety of processes. That is, through mechanical drawing, stamping, painting, drying, polishing, testing, and assembly. The product is lightweight and is easy to carry
2. The product is able to ease the burden on the feet during walking. It is effective in relieving foot fatigue and pain caused by long-time walking and standing. There is no heat generated during liquid transfer
3. This product can be stacked and moved without damage. The metal sheets that make up the product are corrugated to improve its overall strength. The speed of this product is infinitely variable
4. This product is durable. Stitching firm, inconspicuous parts without bulk, flat and smooth. Its operation is safe with no heat, flame or spark risk

We offer the most complete range of Air driven liquid pump models in the industry measured for:

SUNCENTER pumps are air driven at a drive air pressure of 1bar to 8bar (14.5 psi to116 psi) by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve.

Suncenter pumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios.Suncenter model numbers reflect the pumps nominal pressure ratios， while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal liquid pressure can be calculated.

SUNCENTER pumps are self priming. In general it is not necessary to use an air line lubricator. The liquid to be pumped flows into the suction chamber by the up-stroke of the drive piston. By this suction effect, the inlet check valve is opened and the outlet check valve is closed. The down-stroke generates the pressure at the liquid side. The inlet check valve is closed and the outlet check valve is opened by the generated pressure. SUNCENTER liquid pumps cycle automatically, where the pressure is built up the numbers of cycles slow down, the pump stops automatically when the output pressure forces are equal. The pump restarts with a slight drop in the outlet pressure or an increase in the air drive pressure. Pump performance can be affected by a number of conditions, such as freezing of muffler or pilot valves (which is caused by moisture in air lines), inadequate inlet air line sizes and dirty filers. Don’t reduce the indicated port sizes and consult SUNCENTER for exact flow conditions not shown in charts.

Company Features
1. Founded as a manufacturing company, Dongguan Suncenter Fluid Control Equipment Co., Ltd has evolved and grown dramatically in recent years with strong capability in manufacturing maximator air driven liquid pump .
2. We have adopted an advanced and high-efficient production management system. This system has helped us ensure the quality of the raw materials and the reduction of production costs.
3. Dongguan Suncenter Fluid Control Equipment Co., Ltd spares no effort to improve the standard of air hydraulic pump with quality support. Inquiry!