industry-leading fire extinguisher refill station cylinder free design for fire extinguisher

Latest products

High Pressure FM200 Nitrogen Filling Machine for Fire Extinguisher

Computer Control Hydraulic Testing Bench for High Pressure Pipeline Testing

Electric-powered Hydraulic Tube Expander for Efficient Heat Exchanger Manufacturing

Suncenter High Pressure Pneumatic Oil-free Oxygen Booster System with 20L Gas Storage Tank

Product Information
Feedback

FM-200(HFC-227ea)/ NOVEC automatic filling machine

Machine Composition

DGS-FM-5A model filling machine including air-driven gas filling pump, precision pressure gauge, pressure reducing valve, high pressure electromagnetic valve, electric control part, and electronic scale, vacuum pump, etc.

Machine characteristics

DGS-FM-5A model filling machine using the compressed air as power source, Through the Suncenter air driven gas booster and filling pump, driving the FM200/NOVEC filling and conveying, when the transmission weight reaches a certain value, the sensor signal is transferred to the gas electromagnetic valve, the driven air will stop automaticlly,and pump stops working.

Then Connecting the nitrogen gas source, open the high-pressure nitrogen gas valve and start the injection of nitrogen; when precision pressure gauge shows the needed nitrogen pressure then close the nitrogen valve; filling finished; It has the characteristics of small volume, light weight, simple operation, reliable performance. Especially suitable for the filling of FM-200/NOVEC in fire fighting industry.

Suncenter cylinder fire extinguisher refill station free design for fire extinguisher-1

◪ Main parameters:
◪ The driving source: compressed air (by air compressor, need 3-8 bar air pressure)
◪ Medium: FM200/ NOVEC/Nitrogen
◪ Boost ratio: 5:1
◪ Output pressure: 4.2 Mpa/5.3Mpa
◪ Driven air inlet port: fast insert 12 per cent
◪ Nitrogen/FM200 inlet port: ZG3/8 internal thread
◪ High pressure gas outlet port: ZG3/8 internal thread

Suncenter cylinder fire extinguisher refill station free design for fire extinguisher-2

video

l******u

The manufacture of Suncenter fire extinguisher filling equipment is finished complying with a series of requirements. Important indicators of the product including allowance input voltage, electrical safety, and electricity-saving capability are in the stipulated limit. APTEK has a wide range of metric circular connectors and cable assembly that fit almost all standards

m******c

Suncenter fire extinguisher refill station is manufactured in line with electrical safety standards. These standards include CB standards, CCC standards, CCA standards, LOVAG standards, etc. APTEK is located in Zhongshan City which is one of the Four Little Tigers in Guangdong Province

c******e

Suncenter fire extinguisher filling equipment undergoes different types of specific mechanical tests. They include creep and stress relaxation testing, drop or shock testing, fatigue testing, and impact toughness testing. Fast delivery is a promise of APTEK: only 2 weeks are needed

h******b

The production process of Suncenter fire extinguisher filling equipment begins with a rigorous inspection of all incoming raw materials. The materials have been tested for color, grade, and composition. Easy Connection at Industrial Sites is the pursuit of APTEK

n******y

The creation of Suncenter fire extinguisher refill station is concerned about the source, safety, and environmental impact. Its materials such as paint, board, and glues all reach above Grade E1, which means that it is good enough to meet relevant standards. A total of 11 steps are built for custom service at APTEK such as technical feasibility analysis

b******i

fire extinguisher filling equipment, with features like fire extinguisher filling equipment, is kind of ideal fire extinguisher refill station. At APTEK, there are highly efficient production lines for cable cutting, soldering, crimping, etc

Product Message

*Name

Phone

*E-mail

*Content