booster pump system liquid owner for safety valve calibration

Latest products

Hydraulic Pressure Cyclic Test Machine

Suncenter Hydrogen Booster and Filling Machine

Suncenter valve strainer testing machine

Suncenter SST-H300 model flange and welded type Valve Test Bench

Product Information
Feedback

Company Advantages
1. Suncenter high pressure booster pump is verified to comply with relevant applicable standards. They are the US, EU, and numerous other standards including ISO, AATC, EDANA, and ASTM. The product is suitable for most liquids and liquefied gases
2. Quality assurance of booster pump system is necessary in Suncenter. It has flexibility without the use of unloaders or bypass valves
3. The product is shockproof. Its static ring has excellent floatability, providing a buffering function for its parts during the mechanical movement. This product features energy saving and environmental protection
4. The product needs no maintenance. Using the sealed battery which charges itself automatically when there is sunlight, it requires zero maintenance. It can be tailored to meet the specific requirements of customers

Air Driven Liquid CO2 Booster Pump-DGG/DGGD Series.

SUNCENTER pumps are air driven at a drive air pressure of 2bar to 8bar by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve.

Suncenter pumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios.Suncenter model numbers reflect the pumps nominal pressure ratios， while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal outlet pressure can be calculated.

Suncenter liquid booster pump system owner for safety valve calibration-1

DGG Series Liquid CO2 Booster Pumps(Single acting)

Suncenter liquid booster pump system owner for safety valve calibration-2

◪ DGG Series Liquid CO2 Booster Pumps(Single acting)  

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)
DGG6	6:1	2-8 bar	6XPL	48	NPT1/2	NPT1/2	29.91
DGG10	10:1	2-8 bar	10XPL	80	NPT1/2	NPT1/2	18.84
DGG16	16:1	2-8 bar	16XPL	128	NPT1/2	NPT1/2	12.42
DGG28	28:1	2-8 bar	28XPL	224	NPT1/2	NPT1/2	7.11
DGG40	40:1	2-8 bar	40XPL	320	NPT1/2	NPT1/2	4.89
DGG64	64:1	2-8 bar	64XPL	512	NPT1/2	NPT3/8	3.08
DGG80	80:1	2-8 bar	80XPL	640	NPT1/2	NPT3/8	2.44
DGG100	100:1	2-8 bar	100XPL	800	NPT1/2	NPT3/8	1.92
DGG130	130:1	2-8 bar	130XPL	1040	NPT1/2	M14X1.5	1.47
DGG175	175:1	2-8 bar	175XPL	1400	NPT3/8	M14X1.5	1.14

DGGD Series Liquid CO2 Pumps(Double acting)

Suncenter liquid booster pump system owner for safety valve calibration-3

◪ DGGD Series Liquid CO2 Pumps(Double acting) 

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)**
DGGD4	4:1	2-8 bar	4XPL	32	NPT1/2	NPT1/2	70.00
DGGD6	6:1	2-8 bar	6XPL	48	NPT1/2	NPT1/2	48.60
DGGD10	10:1	2-8 bar	10XPL	80	NPT1/2	NPT1/2	30.61
DGGD16	16:1	2-8 bar	16XPL	128	NPT1/2	NPT1/2	19.73
DGGD28	28:1	2-8 bar	28XPL	224	NPT1/2	NPT1/2	11.30
DGGD40	40:1	2-8 bar	40XPL	320	NPT1/2	NPT3/8	7.69
DGGD64	64:1	2-8 bar	64XPL	512	NPT1/2	NPT3/8	4.94
DGGD80	80:1	2-8 bar	80XPL	640	NPT1/2	NPT3/8	3.96
DGGD100	100:1	2-8 bar	100XPL	800	NPT1/2	NPT3/8	3.13
DGGD130	130:1	2-8 bar	130XPL	1040	NPT1/2	M14*1.5	2.40
DGGD175	175:1	2-8 bar	175XPL	1400	NPT3/8	M14*1.5	1.81

Suncenter liquid booster pump system owner for safety valve calibration-4

◪ Liquid carbon dioxide booster pump and pressurization equipment, commonly used in carbon dioxide supercritical extraction of various plant extracts, material foaming, and carbon dioxide fire extinguisher filling. Among them, carbon dioxide extraction is often used in biopharmaceuticals. Experimental research works by using a special pump for liquid carbon dioxide to pressurize carbon dioxide to a supercritical state, which is used to decompose various elements in plants for easy extraction.

DGGD series liquid CO2 pump working picture

Suncenter liquid booster pump system owner for safety valve calibration-5

◪ DGGD series liquid CO2 pump working picture

features

※ Compressed Air driven - no electricity required (connect to normal air compressor)
※ In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar
※ No airline lubricator required
※ Wide range of models with different ratios
※ Built-in-cooling on most models
※ Easy to install, operate and maintain
※ Best price / performance ratio
※ No heat, flame or spark risk and explosion proof 
※ Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter pump will automatically start, keep the loop pressure constant 
※ Applicable for liquid CO2/liquid+gas mixed CO2/Supercritical CO2
※ For liquid CO2 cylinder transfer/filling
※ For CO2 Fire Extinguisher filling 
※ For Supercritical CO2 extraction

video

Company Features
1. In order to lead the booster pump system industry, Suncenter invested a lot of money to absorb new technologies.
2. We are looking forward to building long-term business cooperations with all our customers. In the following business activities, we will keep honest and respectful in communication and interactions, and we will consider establishing regular lines of communication. In such ways, we hope to make progress in improving relationships with clients.

v******h

Reliable raw materials: the raw materials of Suncenter high pressure booster pump are subject to rules and regulations of the factory. They are selected from a supplier that possesses unique know-how and technology. It has sturdy construction to resist the birds' attack

s******u

The raw materials of Suncenter high pressure booster pump is carefully chosen from top grade suppliers. This product stands out for its low starting threshold

i******c

The development of Suncenter booster pump system is conducted by a team of professionals. This product is a great detection helper for many engineers

j******f

Cost-effective raw materials: the raw materials of Suncenter booster pump system are selected at the lowest prices, which have unique attributes that are suitable for the production of the product. It guarantees ice-free operation in extremely low temperatures and freezing conditions

h******a

Premium raw materials: Suncenter high pressure booster pump is made of high-quality raw materials that are only selected from qualified and certified suppliers. Meanwhile, the raw materials of this product go through rigorous screening before production. This product is a great detection helper for many engineers

h******s

booster pump system combines qualities of high pressure booster pump . This product stands out for its low starting threshold

Product Message

*Name

Phone

*E-mail

*Content