stable pump booster bar for-sale for pressurization

Latest products

Ultra High Pressure Gas Booster System

Refrigerant Filling Pump

Portable Safety Valve Test Bench

Automatic CO2 Extinguisher Filling Machine

Product Information
Feedback

Application Scope

The booster pumps of Suncenter Fluid Control Equipment is applicable in the following scenes.With a focus on customers' potential needs, Suncenter Fluid Control Equipment has the ability to provide one-stop solutions.

Product Details

Suncenter Fluid Control Equipment's gas booster is of excellent quality, which is reflected in the details.

Company Advantages
1. The design of Suncenter gas booster system reflects a high end aesthetic.
2. Strict rules in quality inspections has been set up for this product.
3. The high quality will secure its leading status in the market place.
4. Customers can avail themselves from the product at market leading prices.
5. This product keeps up with the industry trends and meets the different requirements of customers.

Compressed Air Driven Gas Booster Pump- DGA/DGD/DGT Series

Suncenter Air Driven Gas Boosters provide for pressures up to 80Mpa (11,600 psi). Used for virtually all known gases, these boosters are ideal for increasing gas pressure, transferring high pressure gas, charging cylinders and scavenging. Key features include:

Applications for Air Driven Gas Boosters

SUNCENTER Air Driven Gas Boosters provide for pressures up to 80Mpa. Used for oil free compression not only of air or Nitrogen, but also flammable and risk gases like hydrogen, oxygen and natural gas. These boosters are ideal for increasing gas pressure, transferring high pressure gas, charging cylinders and scavenging.

Air driven boosters are an efficient alternative instead of electrically driven products and can be used in explosion- proof areas.

As a result of the wide range of models it is possible to select the optimum booster for each application. Single stage, double acting or two stage boosters or a combination of these models can be used to achieve different operating pressures and flow capacities.

SUNCENTER Air Driven Gas Boosters are ideal and widely used for hydrostatic and burst testing for valves, pipes, tubing and pressure vessels; Calibration for safety valves; Automobile regulator detecting and telecommunication cable inflatable appliances.

Suncenter stable pump booster for-sale for pressurization-1

DGA series gas booster pumps(Single acting, single air drive head):

Suncenter stable pump booster for-sale for pressurization-2

◪ DGA pumps are available with high quality seals, which provide significantly better service life as well. Pump head fitted with exhaust cooling devices. All parts in contact with the gas are made of stainless steel.

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
DGA02	2：1	1.0	16	16	2bar-8 bar	2X PL	1/2 / 1/2	960 (at PA of 6 bar )
DGA05	5：1	0	40	40	2bar-8 bar	5XPL	1/2 / 1/2	680(at PA of 6 bar )
DGA06	6：1	2.0	48	48	2bar-8 bar	6XPL	1/2 / 1/2	360(at PA of 10 bar )
DGA10	10：1	3.5	80	80	2bar-8 bar	10XPL	3/8/ 3/8	210(at PA of 10 bar )
GA15	15：1	3.5	120	120	2bar-8 bar	15XPL	3/8/ 3/8	190(at PA of 10 bar )
DGA25	25：1	7.0	200	200	2bar-8 bar	25XPL	1/4/ 1/4	120(at PA of 20 bar )
DGA40	40：1	10	320	320	2bar-8 bar	40XPL	1/4/ 1/4	200(at PA of 40 bar )
DGA60	60：1	20	480	480	2bar-8 bar	60XPL	1/4/ 1/4	180(at PA of 40 bar )
DGA100	100：1	25	800	800	2bar-8 bar	100XPL	1/4/ M14X1.5	136(at PA of 40 bar )

DGD series gas booster pumps(Double acting ):

Suncenter stable pump booster for-sale for pressurization-3

◪ DGD series pumps are double acting, with single air driven heads type. 
◪ DGD pumps are available with high quality seals, which provide significantly better service life
◪ Double pump heads with exhaust cooling devices. 
◪ All components in contact with the gas are made of stainless steel. 
◪ Pipes mounting way are available as customized.

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
DGD10	10:1	3.5	80	80	2bar-8 bar	10XPL+ PA	3/8/3/8	410(at PA of 6 bar )
DGD15	15:1	5	120	120	2bar-8 bar	15XPL+ PA	3/8/3/8	350 (at PA of 6 bar )
DGD25	25:1	10	200	200	2bar-8 bar	25XPL+ PA	1/4/1/4	396(at PA of 20 bar )
DGD40	40:1	15	320	320	2bar-8 bar	40XPL+ PA	1/4/1/4	320(at PA of 40 bar )
DGD60	60:1	25	480	480	2bar-8 bar	60XPL+ PA	1/4/1/4	215(at PA of 40 bar )
DGD100	100:1	35	800	800	2bar-8 bar	100XPL+ PA	1/4/M14*1.5	300(at PA of 60 bar )
DGD130	130:1	50	1040	1040	2bar-8 bar	130XPL+ PA	1/4/M14*1.5	180(at PA of 60 bar )

DGT series gas booster pumps(Double acting, double stage, single air drive head ):

Suncenter stable pump booster for-sale for pressurization-4

◪ DGT pumps are double acting, double stage with single air drive head pumps. They can provide for super high pressure with very low inlet pressure.
◪ DGT pumps are available with high quality seals, which provide significantly better service life
◪ All parts in contact with the gas are made of stainless steel.

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
DGT15	15:1	0.1	56	120	2-8 bar	15XPL	3/8/ 1/4	230(at PA of 8 bar )
DGT25	25:1	0.1	10	200	2-8 bar	25XPL	3/8/ 1/4	156(at PA of 8 bar )
DGT7/25	25:1	5	56	200	2-8 bar	25XPL	3/8/ 1/4	156(at PA of 8 bar )
DGT40	40:1	0.1	10	320	2-8 bar	40XPL	3/8/ 1/4	124(at PA of 8 bar )
DGT15/40	40:1	5	120	320	2-8 bar	40XPL	3/8/ 1/4	124(at PA of 8 bar )
DGT60	60:1	0.1	10	480	2-8 bar	60XPL	3/8/ 1/4	80(at PA of 15 bar )
DGT15/60	60:1	6	120	480	2-8 bar	60XPL	3/8/ 1/4	80(at PA of 15 bar )
DGT100	100:1	0.1	10	800	2-8 bar	100XPL	3/8/ 1/4	63(at PA of 8 bar )

Suncenter stable pump booster for-sale for pressurization-5

◪ DGT series gas booster working picture 

Suncenter stable pump booster for-sale for pressurization-6

Gas pressure booster for cylinder transfer and filling

Suncenter stable pump booster for-sale for pressurization-7

DGS series gas booster system working picture

features

※ Compressed Air driven - no electricity required (connect to normal air compressor)
※ In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar
※ No airline lubricator required
※ Hydrocarbon free - separation between air and gas sections
※ Pressures to 80Mpa (11,600 psi)
※ Wide range of models with different ratios
※ Built-in-cooling on most models
※ Easy to install, operate and maintain
※ Best price / performance ratio
※ No heat, flame or spark risk and explosion proof 
※ Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter pump will automatically start, keep the loop pressure constant 
※ Applicable gas:Air/Ar(Argon)/He(Helium)/H2(Hydrogen)/O2(Oxygen)N2(Nitrogen) CO2/NO2/CH4/C2H2/LNG/LPG/CNG/FM200/SF6/H2S etc

video

Company Features
1. Being a specialist in pump booster field, Suncenter has been very notable in this industry.
2. We have a team of development and research members. Leveraging their years of developing experience, they work to develop innovative products per market trends and also constantly upgrade the form of these products.
3. To be a promoter of the oxygen pumps industry chain, and a contributor in this field is the mission of Suncenter. Contact us! It is widely admitted that Suncenter has been always sticking to the tenet of gas booster . Contact us! Such business principles and strategic guidelines as gas booster system have been formed through the course of Dongguan Suncenter Fluid Control Equipment Co., Ltd's development. Contact us!

k******m

The design of Suncenter gas booster is professionally carried out. It is completed by our designers who think twice before the fabric selection, trims, and fixtures of a bag.

i******w

The processes of Suncenter gas booster involve blending the raw materials, specialized grinding of the raw materials, inert atmosphere firing of the raw materials, and a final grind of the finished product.

s******o

The manufacture of Suncenter gas booster involves several stages: 3D design, cutting, forming, surface treatments, biocompatibility testing, and assembly.

u******f

The shaping processes of Suncenter gas booster system adopts four general production techniques including extrusion, calendering, coating or molding, and casting.

h******b

The production equipment of Suncenter gas booster system is constantly upgraded. The equipment includes extruder, mixing mill, surfacing lathes, milling machinery, and molding press machinery.

d******f

oxygen pumps The introduction of multiple automated machinery and equipment for production oxygen pumps has greatly improved the production accuracy and production efficiency, and effectively reduced the production cost, resulting in the production of oxygen pumps with a higher overall cost performance.

Product Message

*Name

Phone

*E-mail

*Content