Become the first-class high pressure fluid control expert in the world

sales@chinasuncenter.com

Suncenter widely used pneumatic hydraulic pump in china for mining-Suncenter-imgEnglish
Suncenter  > 

AI - Page Sitemap

 > 

Suncenter widely used pneumatic hydraulic pump in china for mining

Suncenter widely used pneumatic hydraulic pump in china for mining

Suncenter widely used pneumatic hydraulic pump in china for mining

MOQ
1 Set
Brand Name
SUNCENTER
Certificate
ISO/CE/SGS
Warranty
13 Months
Packaging
by Plywood case
Shipping Port
Shenzhen/Hongkong
Payment
T/T,Western Union,Credit card.
Transaction method
EXW,FOB,DDP,CIF,CFR
Place of Origin
Guangdong Province, China (Mainland)
Delivery Time
Within 10-15 working days after received deposit.
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:

Compressed Air Driven Hydraulic Pump-DGG Series


We offer the most complete range of Air driven liquid pump models in the industry measured for:


Capability of ultimate pressure, flow or output horsepower.
++
Suncenter widely used pneumatic hydraulic pump in china for mining-1
Compatibility with a broad variety of liquids, such as oil, water and chemical applications.
++


SUNCENTER pumps are air driven at a drive air pressure of 1bar to 8bar (14.5 psi to116 psi) by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve.


Suncenter pumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios.Suncenter model numbers reflect the pumps nominal pressure ratios, while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal liquid pressure can be calculated.


SUNCENTER pumps are self priming. In general it is not necessary to use an air line lubricator. The liquid to be pumped flows into the suction chamber by the up-stroke of the drive piston. By this suction effect, the inlet check valve is opened and the outlet check valve is closed. The down-stroke generates the pressure at the liquid side. The inlet check valve is closed and the outlet check valve is opened by the generated pressure. SUNCENTER liquid pumps cycle automatically, where the pressure is built up the numbers of cycles slow down, the pump stops automatically when the output pressure forces are equal. The pump restarts with a slight drop in the outlet pressure or an increase in the air drive pressure. Pump performance can be affected by a number of conditions, such as freezing of muffler or pilot valves (which is caused by moisture in air lines), inadequate inlet air line sizes and dirty filers. Don’t reduce the indicated port sizes and consult SUNCENTER for exact flow conditions not shown in charts.


Suncenter widely used pneumatic hydraulic pump in china for mining-2



DGG Series Liquid Pumps(Single acting, single air drive head)


Suncenter widely used pneumatic hydraulic pump in china for mining-3
  • DGG pumps have aluminum bodies and wetted materials of stainless steel or carbon steel ,which  depends on different service liquid. Materials of stainless steel, make them an excellent choice of water application. High quality seals, long service life available.


Model

Pressure  Boost Ratio

Driven air pressure PL 

Formula to calculate outlet pressure

MAX Outlet
     Pressure(bar)*

Liquid inlet Connection

Liquid outlet Connection

MAX Flow (L/min) 

DGG6

6:1

2-8 bar

6XPL

48

NPT1/2

NPT1/2

29.91

DGG10

10:1

2-8 bar

10XPL

80

NPT1/2

NPT1/2

18.84

DGG16

16:1

2-8 bar

16XPL

128

NPT1/2

NPT1/2

12.42

DGG28

28:1

2-8 bar

28XPL

224

NPT1/2

NPT1/2

7.11

DGG40

40:1

2-8 bar

40XPL

320

NPT1/2

NPT1/2

4.89

DGG64

64:1

2-8 bar

64XPL

512

NPT1/2

NPT3/8

3.08

DGG80

80:1

2-8 bar

80XPL

640

NPT1/2

NPT3/8

2.44

DGG100

100:1

2-8 bar

100XPL

800

NPT1/2

NPT3/8

1.92

DGG130

130:1

2-8 bar

130XPL

1040

NPT1/2

M14X1.5

1.47

DGG175

175:1

2-8 bar

175XPL

1400

NPT3/8

M14X1.5

1.14

DGG255

255:1

2-8 bar

255XPL

2040

NPT1/4

M14X1.5

0.75

DGG400

400:1

2-8 bar

400XPL

3200

NPT1/4

M14X1.5

0.48

DGG510

510:1

2-8 bar

510XPL

4080

NPT1/4

M14X1.5

0.65

DGG800

800:1

2-8 bar

800XPL

6400

NPT1/4

M14X1.5

0.42


DLS Liquid (hydraulic) booster system = Liquid pump+ following valves, gages, and parts


Suncenter widely used pneumatic hydraulic pump in china for mining-4
  • The standard liquid pump system including following parts:

  • Air –driven liquid booster pump (DGM/DGG/DGGD Three series for choosing)

  • Stainless steel (carbon steel) material cabinet (Three models for choosing)

  • F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)

  • Driven air switch (Pump starting switch), driven air pressure gauge, water tank

  • Liquid inlet/outlet switch, high pressure liquid guage, unloading valve, interconnecting pipes etc.

  • And we could also customize it according to clients’ special requirement.


DLS series Liquid Pressure Booster Pump System-The hottest selling Model C cabinet


Suncenter widely used pneumatic hydraulic pump in china for mining-5
  • DLS series Liquid Pressure Booster Pump System-The hottest selling Model C cabinet



Suncenter DLS Series Pneumatic (Air driven) Liquid Booster System


Suncenter- DLS Series Pneumatic(Air driven) Hydraulic Power Packs


SUNCENTER- Hydraulic power packs(Liquid pump system) are compact and delicacy solution tailored to customer specific requirements with air driven liquid pumps as well as all accessories to be fitted and installed on the frame or in closed cabinet.


To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator. The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure. SUNCENTER Hydraulic power packs are available with wide range of pressure ratios make these series of pumps ideal for powering a variety of oil/hydraulic operations. The maximum operating pressure up to 640 MPa.


As the pressure will be generated by means of a pneumatically operated pump,the electric connection will not be necessary. To operate this system, the air driven liquid pump have to be equipped with the air control unit combined filter and water separator, pressure-regulating valve, pressure control gauge as well as manual relieve valve. In this operation, the pump will be mounted to the stainless steel tank in the closed cabinet in a compact and space saving manner. Pressure gauges, valves and pressure regulators will be fitted on panel.


The desired operating pressure can be attained by adjusting the driving air pressure. When the driving air pressure and the output pressure reach the balance, the pump stops filling pressure and the output pressure stays at the preset value. This hydraulic unit can be used for all kinds of pressure testing and test tools for research and test institutes or for other functions requiring a determined pressure. 


Suncenter widely used pneumatic hydraulic pump in china for mining-6



features

  •   Compressed Air driven - no electricity required (connect to normal air compressor)

  •   In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar

  •   No airline lubricator required

  •   Pressures to 640Mpa (6400 bar)

  •   Wide range of models with different ratios

  •   Built-in-cooling on most models

  •   Easy to install, operate and maintain

  •   Best price / performance ratio

  •   No heat, flame or spark risk and explosion proof

  •   Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter   pump will automatically start, keep the loop pressure constant


video





The production stages of Suncenter pneumatic hydraulic pump involve a few aspects. It has to undergo die casting, finish machining, CNC machining, surface treating, and electrostatic spraying. Hengsheng's mosaics are strictly selected before being packed
The package of Suncenter maximator air driven liquid pump will be done with professional materials. It is packaged with hardened carton, foam, cardboard, or wooden box to protect it in an all-around way to minimize transportation damage. Heng Xing branded mosaics have been certified under SGS, TUV, BV and CE
Suncenter pneumatic hydraulic pump will go through a series of tests after produced. It is scrutinized in terms of colorfastness, dimensional stability, appearance after washing, quality of thread and yarns, etc. New machines such as 68 meter long kiln are adopted for manufacturing Heng Xing branded mosaic
Suncenter maximator air driven liquid pump shapes up after several processing stages. Its raw materials go through the drilling, bursting, grinding, and separation of the ore from the waste rock. Hengsheng's mosaics are available in different materials such as metal, ceramic, stone, and glass
The production process of Suncenter maximator air driven liquid pump covers full quality inspection. It will be checked for CNC engraving, surface burnishing, polishing, and yellowing treating quality. Heng Xing branded mosaics are updated every season
It can continually regulate the skin's microclimate. As the skin gets hot, the heat is absorbed, and as it cools, that heat is released. Heng Xing branded mosaics are well packed to guarantee the safety during shipping
This product is the best choice for warmth on a cold night. It is perfectly suitable for an adult or children's bedroom or guest room. Heng Xing branded mosaics are updated every season
The product has the advantage of high accuracy. Its self-diagnostic feature makes sure that its operation is accurate and correct. The quantity, quality, and price of Heng Xing branded mosaics are 100% assured
This product is recyclable. Even if one just throws it away (which is not advisable), the material would naturally degrade without harming the environment. Heng Xing branded mosaics are well packed to guarantee the safety during shipping
This product does not fade. The excessive dye on the surface is treated and removed thoroughly to make it have excellent quality. Hengsheng's glass mosaic tiles are applied widely, especially in kitchen, hotel and KTV
This product is highly efficient. It can perform tasks quickly and deliver results in a short time. Heng Xing branded mosaics are fireproofing
Wearing this product is not likely to cause pain to the feet. Instead, it to some extent eases the burden of feet and offers enough support. The surface finish of Heng Xing branded mosaics is glossy
Thanks to its easy operation and maintenance during its service life, this product can greatly help reduce operation costs. Hengsheng's mosaics are available in different materials such as metal, ceramic, stone, and glass
The product will create a pleasing wearing experience. It will not impair the foot from functioning in a natural way while offering enough support and comfort. The design of mosaics is carried out by Hengsheng's professional design team
With all these features, this piece of furniture will make people's life easier and provide them with warmth in spaces.
This product is made to last for years, rather than to be discarded after one or two seasons. It doesn't lose their shape or look worn out after washes. The mosaics are easy to reset
People will find that this product fits well with their body shape. It is really flattering and helps people receive many compliments. Heng Xing branded mosaics are customizable
Product Message
Chat Online inputting...