Safety valve test bench SVT40-DN400-CC computer control model

DGGD4 model LPG booster pump

High pressure gas compressor

PET bottle blowing air compressors

Heat exchanger tubes expanding machine

Product Information
Customer Reviews

Application Scope

Suncenter Fluid Control Equipment's hydro test pump is widely used in various scenes.Suncenter Fluid Control Equipment provides comprehensive and reasonable solutions based on customer's specific situations and needs.

Product Comparison

Supported by advanced technology, Suncenter Fluid Control Equipment has a great breakthrough in the comprehensive competitiveness of booster pumps, as shown in the following aspects.

Company Advantages
1. The design of Suncenter hydro pressure test pump is first prepared on the latest CAD software. Then, our renowned designers verify these designs to meet the requirement of standards in the sanitary ware in the industry.
2. hydrostatic pressure test produced by our company has the advantage over the others on hydro pressure test pump .
3. Compared with the other similar products, hydrostatic pressure test has a lot of superiorities, such as hydro pressure test pump .
4. Dongguan Suncenter Fluid Control Equipment Co., Ltd improves the quality of after-sales service to determine the market.
5. The professional service of Suncenter has left impression on many customers.

Introduction

Suncenter-High-quality Valve Test Bench | Safety Valve Test Bench

◪ The safety valve test bench is a new type of pressure test device developed by our company for reference to GB/T 12242-2005 (pressure release device and performance test specification), which is used to adjust and test the setting pressure of the safety valve.

Function and features

Safety valve test bench is used for various safety valve setting pressure adjustment, the whole set pressure detection, discharge pressure detection, back seat pressure testing, assessment of its pressure safety performance etc.. ,

◪ A. pressure range: 0-480 bar for option(gas pressure and water pressure)
◪ B. test medium: air, nitrogen, water;
◪ C. test valve diameter: DN15-DN400 for option
◪ D. pressure control accuracy: less than 1%F.S;
◪ E. pressure measurement accuracy: 0.4 pressure gauge (optional higher pressure level);

◪ F. Clamping way: hydraulic cylinder clamping;
◪ G. station interface type: screw and flange type
◪ H. clamping force output range: 0-50 tons;
◪ I. supply voltage: 50Hz -60Hz ,220V/380V for option
◪ J.Size：1500×1200×900mm(machine) +1500×800×800mm(clamping device)

Control panel

Suncenter-High-quality Valve Test Bench | Safety Valve Test Bench-1

Clamping seat

Suncenter-High-quality Valve Test Bench | Safety Valve Test Bench-2

Schematic diagram

Suncenter-High-quality Valve Test Bench | Safety Valve Test Bench-3

Instruction for software control part

Suncenter-High-quality Valve Test Bench | Safety Valve Test Bench-4

◪ Figure 1
◪ The first step: start the computer and double click the boot program, as shown in Figure 1.
◪ The second step: after the program, enter the main interface of the program.

Suncenter-High-quality Valve Test Bench | Safety Valve Test Bench-5

◪ In the main interface, select the appropriate sensor, and pay attention to the selection of the sensor not to exceed the 2/3. of the measuring process ,as shown in Figure3

Suncenter-High-quality Valve Test Bench | Safety Valve Test Bench-6

◪ In the main interface, choose water pressure test or air pressure test. As shown in Figure 4.

Suncenter-High-quality Valve Test Bench | Safety Valve Test Bench-7

◪ After selecting the pressure or water pressure test, click the menu bar test information to set the options. As shown in Figure 5.

Suncenter-High-quality Valve Test Bench | Safety Valve Test Bench-8

◪ Display the dialog box for the test information, as shown in Figure6

With printer,could print the testing report directly.

Suncenter-High-quality Valve Test Bench | Safety Valve Test Bench-9

Suncenter-High-quality Valve Test Bench | Safety Valve Test Bench-10

Suncenter-High-quality Valve Test Bench | Safety Valve Test Bench-11

◪ Safety valve test bench SVT40-DN400-CC computer control model

video

Company Features
1. As an outstanding producer of hydrostatic pressure test, Dongguan Suncenter Fluid Control Equipment Co., Ltd is popular among customers.
2. Dongguan Suncenter Fluid Control Equipment Co., Ltd is outfitted with the most advanced and expert R&D team.
3. Dongguan Suncenter Fluid Control Equipment Co., Ltd firmly adheres to professional service to every customer. Inquire now! Suncenter wishes to be favored by each customer. Inquire now! Establishing well corporate culture will be conducive to forming cohesive spirit of each Suncenter staff. Inquire now! Dongguan Suncenter Fluid Control Equipment Co., Ltd remains dedicated to developing valve test bench while continuing to engage in mutually beneficial long-term cooperation with our customers. Inquire now!

Favorable rate

100%

Buyer impression