The mechanical principle of axial piston pump

Axial piston pump manufacturer - — Axial piston pump are usually consists of cylinder block, oil distribution plate, plunger and inclined plate and other major parts. Cylinder with multiple plunger and plunger is axial placement, namely the plunger axis parallel to the axis of the transmission shaft, so called it the axial plunger pump. But it is not the same in the reciprocating plunger pump, the plunger of the because it not only in the gas booster pump cylinder for reciprocating motion, and plunger pump cylinder and swash plate relative rotation motion. Plunger with a spherical end contact with the swash plate. On the oil distribution disc with high and low pressure groove, each other by the partition from isolation, security seal, respectively and the inlet of the pump and the oil outlet connected. The axis of the inclined plate with a tilt Angle between axis of cylinder body. The working principle of the axial piston gas booster pump stocks move when the motor shaft rotates, the pump cylinder and plunger rotation, plunger head persistent insist on contact with the swash plate, due to the inclined plate and cylinder as a point of view, so the cylinder rotates, the plunger in the pump cylinder for reciprocating motion. It from 0 ° to 180 °, or go to the orientation of the plunger, the plunger cylinder volume increases gradually, so the liquid of oil distribution plate of oil suction mouth a sucking oil cylinder; And the plunger is from 180 ° to 360 °, the plunger cylinder volume decreases, so the liquid in the cylinder oil distribution plate of the outlet of the liquid. Just drive shaft rotation, water pump and constant work. Change the Angle of the inclined element, can change the plunger in the pump cylinder stroke length, can change the pump flow. Angle is fixed quantitative pump, Angle can be changed is called variable pump. Axial piston gas booster pump based on the components of the tilt are not identical, oblique disc and shaft type two kinds. Swash plate is inclined plate one Angle, relative rotary cylinder and the plunger reciprocating motion in the pump cylinder. The shaft axis and axis of cylinder body are together. This structure is brief, high speed, but pleaded with high working conditions, the plunger end and the contact part of inclined plate is often weak links. The swash plate of inclined shaft axis and shaft axis was together. It is because the plunger cylinder relative tilt Angle of a drive shaft and make the plunger reciprocating motion. Traffic scheduling based on shaking the Angle of the plunger cylinder to end, so some say again cylinder type. It, compared with that of swash-plate work, large flow, but the structure is messy. Keywords: axial plunger pump manufacturers, axial plunger pump manufacturers selling, axial piston pump manufacturer suppliers
Dongguan Suncenter Fluid Control Equipment Co., Ltd has an array of branches in domestic for servicing customers with high-quality products.
Now you can buy cheap at wholesale price at Dongguan Suncenter Fluid Control Equipment Co., Ltd! Do visit Suncenter Fluid Control Equipment for great deals!
Dongguan Suncenter Fluid Control Equipment Co., Ltd has enlarged the scope of services, which can fully please customers' demands.
Lucky to know that you are not alone in the face of hydraulic pressure pump issue. Let Dongguan Suncenter Fluid Control Equipment Co., Ltd be your selected gas booster expert in providing first class to help you out.
Dongguan Suncenter Fluid Control Equipment Co., Ltd might focus its marketing efforts by highlighting its end product—improved technology and increased profits—not its producing methods.